Multivis ADT RN 5W-30 has been specifically formulated to cope with the demands of Renault vehicles produced after 2018 and fitted with their latest gasoline and diesel engines. This product also covers the requirements of older units where RN0700 and RN7
Alto Machine Oils are a versatile range of oils that can be used wherever a straight mineral oil with modest additive treatment has been specified.
Golden Film AG Gear Oils are a range of mineral oil based lubricants, formulated without extreme pressure (EP) additives.
Aria EP220 Rock Drill Oil
Terralus BVG 68 Biodegradable Hydraulic Oil
Race C 50 Castor based motorcycle engine lubricant
Compound Steam Cylinder Oil T
EP 80w-90 Gear Oil GL5
Lodexol ISO 150 Industrial Gear Oil
Lodexol FS 320 Fully Synthetic Industrial Gear Oil
Liquimatic No 3 zinc free ISO VG 22 Hydraulic Oil
Lodexol PG 320 Polyalkylene Glycol Industrial Gear Oil
Supercut 3000 is a micro-emulsion metalworking fluid that is readily miscible with most mains water producing a transparent blue emulsion that is suited to a wide variety of applications.
S-3403 is a special synthetic chain lubricant specifically designed for use in high temperatures
Astra 100 Slideway Oil
Race 4T 10W-50 can be used in all makes of 4-stroke 600cc to 1600cc performance motorcycles, tourers, cruisers and custom machines. Suitable for highly tuned competition engines, V-Twin or opposed-twin, used by Aprilia, Ducati, Suzuki, Yamaha, Kawasaki, Cagiva, Honda and BMW.
Tabor 95 Mould Release Oil is recommended as a concrete release agent for use with all steel and wooden moulds, especially those used for continuous production of slabs and paving.
Race Super 2 is recommended for engines fitted with an oil injector system and has been specially formulated to maintain the correct lubricant metering viscosity in all conditions.
Multivis ECO-S 0W-20 is a high performance fully synthetic engine oil formulated to cope with the exacting demands of OEMs requiring low viscosity engine oils.
Multivis ADT C3 5W-30 is a mid-SAPS (Sulphur, Ash, Phosphorus) synthetic multigrade engine oil
Race ATV 10W-40 is recommended for use in all-terrain vehicles, quad bikes, generator sets and other
ancillary equipment, where a product of this type and viscosity grade is specified.
Faracut HS3 is a highly refined cutting oil with special lubricity additives to enhance cutting without the use of Chlorine, Sulphur or Phosphorus.
Compound steam 1000 has been specifically formulated for use in non-condensing models and with the co-operation of Stanley Steam Car owners. This advanced formulation not only ensures the correct lubrication of cylinders but also good visibility in the ‘Winker’. This product can be used in all steam engines working up to pressures in excess of 250lbs per square inch, with either saturated or superheated steam. Meets the specification requirements of British Rail schedule number MT276.
Lift action pump for the transfer of lubricants
Alto Machine Oils are a versatile range of oils that can be used wherever a straight mineral oil with modest additive treatment has been specified. Alto 460, 680 and 1000 can also be used as steam cylinder oils when condensate recovery is required.
Morris MEG Antifreeze is suitable for most engine cooling systems found in cars, vans, trucks, agricultural equipment and contractor’s plant. Exceeds the requirments of many European and International Standards including: ASTM D3306, SAE J 1034, BS 6580 (2010).
Ankor RR Preservative Oil
Astra 150 Slideway Oil
EP 85W-140 Gear Oil API GL5 is a mineral oil based lubricants formulated for use in a wide range of automotive, plant, agricultural and industrial transmission systems.
Golden Film Flushing Oil is a combination of highly refined light mineral oils and detergent/dispersant additives to enhance removal of sludge and lacquers.
Workshop Pro Fully Synthetic Chain Lubricant is a specially formulated aerosol designed for the protection of chains used in a variety of applications.
K25 Graphited calcium Grease (Fith Wheel)
Lodexol FS 460 Fully Synthetic Industrial Gear Oil
Liquimatic No 4 zinc free ISO VG 32 Hydraulic Oil
Lodexol ISO 220 Industrial Gear Oil
Developed for full size steam engines operating on the national rail network and Sentinel S Type waggons where true superheat conditions are experienced on longer hauls i.e. up to 650°F.
Marcia D is a multipurpose neat cutting oil containing extreme pressure and lubricity additives developed especially for use in medium to heavy duty applications on free cutting, medium tensile, certain stainless steels and many non-ferrous alloys.
Lodexol PG 460 polyalkylene glycol industrial gear oil
Supergrind SW is a fully synthetic water-mix grinding fluid that forms a true solution when diluted with water.
Supergrind SW is formulated to have a very low foaming tendency, even when used with soft water.
Recommended for the front forks and rear suspension units on all motorcycles used in arduous competition and off road activities. For normal road use the viscosity grade recommended in the manufacturer’s handbook should be adhered to. Suspension Grades are available in four viscosity grades 5, 10, 15 & 20wt. All grades can be freely mixed if required to provide an even greater state of suspension tune.
Supercut 4000 is a semi-synthetic, micro-emulsion metalworking fluid. It is readily miscible with most mains water to produce a translucent green emulsion that is suited to a wide variety of applications
Morris Lubricants Transformer Oil is a highly refined naphthenic product