Marcia F has been developed as a low viscosity, extreme pressure neat oil, suited to a wide variety of applications, particularly involving ferrous alloys
S-3403 is a special synthetic chain lubricant specifically designed for use in high temperatures
Lodexol PG 320 Polyalkylene Glycol Industrial Gear Oil
Lodexol PG 460 polyalkylene glycol industrial gear oil
Lodexol PG 220, Synthetic Polyalkylene Glycol Industrial Gear Oil
Lodexol XFS 80W-140 Fully Synthetic Limited Slip Gear Oil
Lodexol PG 150 Polyalkylene Glycol Industrial Gear Oil
Multitrans MTS 75W-90 is an advanced, fully synthetic gear oil developed for use in automotive lightduty and heavy duty axles and heavy-duty non-syncronised manual transmissions.
Terralus AIR-O-LUBE Air Mist Coolant
Air Force 8000 Full Synthetic compressor oil ISO VG 68 Compressor Oil
Supergrind CG is a specially developed water miscible fluid for all forms of carbide tooling.
Airforce 8000 FS ISO VG 32 is an ester based, fully synthetic, compressor lubricant designed specifically to meet the requirements of rotary screw compressors including modern, variable speed types
Air Force 8000 Full Synthetic compressor oil ISO VG 46 Compressor Oil
Multivis ECO V 0W-20 is a low viscosity engine oil providing not only the potential for fuel savings, but a high level of component protection under a wide range of operating conditions in passenger cars
Multivis ECO VB 0W-20 is a high performance fully synthetic engine oil formulated to cope with the exacting demands of OEMs requiring low viscosity engine oils, in particular Volkswagen Audi Group.
K65 Synthetic High Temperature Grease
Multitrans SA 75W-140 is an advanced, fully synthetic gear oil developed for use in heavy duty axles, including Scania units requiring a lubricants with a STO 2:0A qualification.
Multivis MLR 10W-60 is a fully synthetic multigrade motor oil developed directly from motor racing technology
Lodexol FS 460 Fully Synthetic Industrial Gear Oil
Lodexol FS 320 Fully Synthetic Industrial Gear Oil
Ecotrans 75W-80 is a synthetic technology, high performance transmission fluid, developed for use in ZF manual and automated manual transmission (AMT) systems
Superclean Morendo DD is a multifunctional diesel fuel additive
Lodexol FS 220 Fully Synthetic Industrial Gear Oil
A low viscosity, thermally stable, ester based lubricant for use on aluminium ingot and bar for sawing applications.
The product may be applied by air mist lubricator or by flood application.
Lodexol FS 150 Fully Synthetic Industrial Gear Oil
Supercut 8000 is a highly sophisticated, semi-synthetic, micro emulsion specially designed for heavy duty machining applications in moderate to hard diluent waters (water hardness 150 – 350ppm CaCO3).
Multitrans DCT is a premium multi-vehicle DCT fluid, formulated to provide the required levels of component protection and friction control, critical to the operational efficiency and longevity of dual clutch designs.
Supercut G is a highly sophisticated semi-synthetic micro-emulsion cutting fluid incorporating the latest in performance additive technology.
Supercut 6000 has been developed to supply the modern machine workshop with a single versatile product to cope with a wide range of machining operations.
Liquisafe is a high quality fire resistant hydraulic fluid blended with high and low molecular weight polyalkylene glycols in a stable water solution.
Supersaw is a micro-emulsion, biocide protected, water soluble cutting fluid. It forms a very stable emulsion, even with hard water, and incorporates extreme pressure additives for enhanced cutting performance.
Supergrind SW is a fully synthetic water-mix grinding fluid that forms a true solution when diluted with water.
Supergrind SW is formulated to have a very low foaming tendency, even when used with soft water.
Lodexol MTFE 75W can be used in manual gearboxes, automated manual gearboxes (AMTs), semi -automatic gearboxes, transaxles and transfer boxes, where a gear oil of this type and viscosity grade is specified.
Multivis MLR 10W-50 is a fully synthetic multigrade motor oil developed directly from motor racing technology
Multitrans MPC is a high performance transmission fluid, designed to provide rationalisation opportunities without compromising performance.
Multivis ECO PC 0W-30 is a new generation passenger car engine oil formulated and developed for the latest PSA petrol and diesel engines, including hybrids.
Lodexol SS 80W-140 is an extreme pressure (EP) semi-synthetic gear oil designed for use in gearboxes, drive axles and other transmission systems.
Race ATV 10W-40 is recommended for use in all-terrain vehicles, quad bikes, generator sets and other
ancillary equipment, where a product of this type and viscosity grade is specified.
Aqua Max 2 is recommended for use in two cycle water cooled outboard engines using premix or oil injection, from high powered down to small cylinder auxiliary engines. Also suitable for certain two cycle air-cooled engines operating under normal duty.
Versimax HD11 5W-30 is a top tier heavy duty diesel specific engine oil that has been designed to meet the necessary chemical limits required to maintain the efficiency of exhaust aftertreatment devices, including: DPF’s (diesel particulate filters), SCR (Adblue) / EGR NOX reduction systems, diesel oxidation catalysts (DOCs) and Adblue Slip-Catalysts.
MULTITRANS CVT MULTI-APPLICATION TRANSMISSION FLUID
Multitrans CVT is a high performance transmission fluid, designed for use in a wide variety of pushbelt type Continuously Variable Transmissions (CVTs), including Jatco and Aisin systems. The product has been developed to ensure positive CVT operation for enhanced driving comfort and outstanding component protection.
Terralus BVG 68 Biodegradable Hydraulic Oil
Lodexol SS 75W-90 is an, extreme pressure (EP) semi-synthetic gear oil designed for use in gearboxes, drive axles and other transmission systems.
Race Sport 4 10W-40 stays-in-grade, even in high revving engines, ensuring optimum reliability of both engine and gearbox components. An ideal choice for riders who commute and attend track days.
K2EP Lithium Complex Grease
K43EP is a high quality NLGI 3 Lithium grease suitable for a wide range of plain and rolling bearings used within given temperature limits & is used extensively for applications throughout industry and the automotive sector.
K43EP is currently in British mainline applications as follows:
• Carriage wheel sets using Commonwealth, B4 and B5 passenger bogies. • Class 37/47/50/56 locomotive axle bearings and suspension tubes on freight and passenger duties.
K43EP is also used extensively on Heritage Railway lines where a grease of this type is specified.
K48 Moly - Grease
Multi vehicle transmission fluid
Multivis ECO PC 0W-20 has been primarily formulated for use in PSA DV5Rx; EP6LTD; EB2FA
& LTD; EB2ADTx e-HDI and Puretech stop-start engines, fitted after February 2023.
Supercut 4000 is a semi-synthetic, micro-emulsion metalworking fluid. It is readily miscible with most mains water to produce a translucent green emulsion that is suited to a wide variety of applications
Multivis ECO FE 0W-20 is recommended for passenger car engines, including turbo-charged and
supercharged versions, requiring a low viscosity grade.
Multivis ECO FE 0W-20 is a low viscosity, high performance engine oil that has been formulated primarily for use in Ford’s 1.5L EcoBlue turbodiesel units.
K982 Magnaplex Open Gear Grease
Lodexol MTF 75W-80 is a high performance, extreme pressure (EP) gear oil formulated and optimised for use in automotive gearboxes.
Multivis ECO PV 0W-20 is a low viscosity passenger car engine oil that provides advanced fuel economy performance coupled with outstanding wear protection and cleanliness under a wide variety of driving conditions.
Multivis ADT VA 5W-30 may be used in all VAG vehicles employing fixed service or long life service maintenance schedules where the use of engine oils approved to VW 504.00 / 507.00 are specified and where VW 503.00/503.01/506.00/506.01 performance levels have previously been required.
Liquimatic XT284 is recommended for use in highly stressed plant and off-highway transmission
systems incorporating wet brake technology. May also be used in powershift transmissions, mechanical transmissions,
transaxle/hydraulic systems, hydrostatic drives, torque converters, final drives, reduction hubs, power
steering, steering boxes, PTO boxes, brake/clutch systems, hydraulic units, et cetera where one
of the stated performance levels is specified.
Terralus BVG 46 Biodegradable Hydraulic Oil
Terralus BVG 32 Biodegradable Hydraulic Oil
Faracut HS3 is a highly refined cutting oil with special lubricity additives to enhance cutting without the use of Chlorine, Sulphur or Phosphorus.
Liquimatic DS is an advanced synthetic based automotive transmission fluid that offers increased cold start efficiency resulting in improved fuel economy.
Morris Lubricants Versimax® HD16 5W-30 is designed for use in Euro 5 / Euro 6, Interim Tier 4 / Stage 3B / Tier 4 and Stage 4 diesel engines, where any of the performance levels shown below are specified. Market sectors include: commercial vehicles, coaches, buses, off-highway and agricultural equipment, etc.
Supercut 3000 is a micro-emulsion metalworking fluid that is readily miscible with most mains water producing a transparent blue emulsion that is suited to a wide variety of applications.
LARGO GP2 is formulated to suit spark erosion machines of all power ratings and sizes. The product is a multipurpose dielectric fluid designed to enable optimum rates of metal removal, together with low electrode wear, good surface finish and fine tolerances. Largo GP2 is also ideal for high speed spindle bearings on grinding machines and other applications where a non-EP grade of this viscosity is requested by the equipment manufacturer.
These oils are for use in most Locomotives and Stationary engines working with saturated steam. They are produced from special cylinder stock treated with fatty compounds and particularly Tallow to provide superior lubrication even if wet conditions are encountered.
Heavy Liquid Paraffin is a highly refined medicinal grade that is water white in colour, odourless and tasteless. This product is extremely stable and will not break down or form sludges.
Cora B is a medium viscosity neat oil containing extreme pressure and lubricity additives
Multivis ADT VX 5W-30 is a synthetic technology advanced lubricant, designed for use in the latest engines, including those fitted with exhaust gas after-treatment devices.
Marcia DE is a heavy duty neat cutting oil containing high levels of extreme pressure additives
Terrain LS 80W-90 is a mineral oil based gear oil that has been formulated with a high level of extreme pressure (EP) additives and friction modifiers to protect the critical mechanisms of limited slip differentials used in heavy off-highway and agricultural equipment.
Supercut 2000 is an extreme pressure, micro-emulsion metal working fluid.
Race V Twin 20w-50 meets the requirements of high performance motorcycles such as BMW, Harley Davidson, Triumph and certain Yamaha models that specify an SAE 20W/50 viscosity engine oil.
Multivis ADT C3 5W-40 is a mid-SAPS (Sulphur, Ash, Phosphorus) synthetic multigrade engine oil
Supergrind MP is a fully synthetic water mix grinding fluid offering extended sump life.
Seria ISO 4113 Calibration Fluid is suitable for all types of power driven and hand operated pumptest stands and nozzle testing apparatus.
Supergrind Plus is a fully synthetic grinding fluid