Bearing Oil 460 for steam driven equipment
Bearing Oil 220 for steam driven equipment
Compound Steam Cylinder Oil T
These oils are for use in most Locomotives and Stationary engines working with saturated steam. They are produced from special cylinder stock treated with fatty compounds and particularly Tallow to provide superior lubrication even if wet conditions are encountered.
Supercut 4000 is a semi-synthetic, micro-emulsion metalworking fluid. It is readily miscible with most mains water to produce a translucent green emulsion that is suited to a wide variety of applications
Supercut 1000 is a water soluble metalworking fluid of the traditional type.
Vivace SD is a very heavy duty versatile forming and deep drawing fluid manufactured from a base of mixed solvent refined mineral oils and synthetic base stocks.
Race C 30 Castor based motorcycle engine lubricants
K968 White Food Machinery Grease - Food Safe Oil
Liquimatic HV46 High viscosity index hydraulic oil
Liquimatic HV 22 High viscosity index hydraulic oil
Liquimatic No 6 zinc free ISO VG 68 Hydraulic Oil
Liquimatic No 4 zinc free ISO VG 32 Hydraulic Oil
Liquimatic No 2 zinc free ISO VG 15 Hydraulic Oil
Triad 46 is recommended for both Industrial and off highway hydraulic systems. Other applications include: machining centre headstocks, centralised lubrication systems, suspension units, tipping gear, jacks, PTOs, et cetera.
Triad 32 is recommended for both Industrial and off highway hydraulic systems. Other applications include: machining centre headstocks, centralised lubrication systems, suspension units, tipping gear, jacks, PTOs, et cetera.
Multivis ECO PC 0W-20 has been primarily formulated for use in PSA DV5Rx; EP6LTD; EB2FA
& LTD; EB2ADTx e-HDI and Puretech stop-start engines, fitted after February 2023.
Air Force 4000 ISO VG 100 Compressor Oil
Air Force 4000 ISO VG 68 Compressor Oil
Air Force 4000 ISO VG 46 Compressor Oil
Air Force 4000 ISO VG 32 is a 4000 Hour Rotary Screw Compressor Oil that complies with DIN 51506 VDL & ISO 6743-3: DAG
Air Force 2000 ISOVG 150 Compressor Oil
Air Force 2000 ISOVG 68 Compressor Oil
Ultralife 4 Long Life OAT Antifreeze may be used with confidence in engines manufactured from cast iron, aluminium or combinations of the two metals, and in cooling systems made of aluminium or copper alloys.
Morris Ultralife 3 can be used in internal combustion engines (ICEs), hybrids and the indirect cooling
systems of battery electric vehicles (BEVs) where any of the specifications listed aredemanded by the equipment manufacturer.
Ultralife 2 may be used with confidence in engines manufactured from cast iron, aluminium orcombinations of the two metals, and in cooling systems made of aluminium or copper alloys. It isparticularly recommended for use in Asian OEM’s, in line with their basic chemistryrequirements.
Ultralife 1 is suitable for the cooling systems of modern engines in passenger car, trucks, agricultural and contractors plant, where an OAT antifreeze of this specification is demanded.
Air Force EP22 Airline Oil is recommended for air tools of all types including road drills, jack hammers, air speed saws and torque wrenches. Also recommended for air motors and the lubrication of pneumatic rams and cylinders. Can also be used for general lubrication in industrial applications.
Golden Film 10W-40 is suitable for use in passenger cars and light commercial vehicles from 1980s & early 1990s, that may have originally specified a 10W-40 or where engines have been rebuilt or restored.
Multivis ECO PC 0W-30 is a new generation passenger car engine oil formulated and developed for the latest PSA petrol and diesel engines, including hybrids.
Multivis ECO VB 0W-20 is a high performance fully synthetic engine oil formulated to cope with the exacting demands of OEMs requiring low viscosity engine oils, in particular Volkswagen Audi Group.
Multivis CST HP 5W-40 is a synthetic technology engine oil developed directly from motor racing technology and formulated for use in the latest passenger car and van engine designs.
Liquimatic XT284 is recommended for use in highly stressed plant and off-highway transmission
systems incorporating wet brake technology. May also be used in powershift transmissions, mechanical transmissions,
transaxle/hydraulic systems, hydrostatic drives, torque converters, final drives, reduction hubs, power
steering, steering boxes, PTO boxes, brake/clutch systems, hydraulic units, et cetera where one
of the stated performance levels is specified.
A specially developed grease using a semi-synthetic blend of base oils manufactured with a bentone thickener containing a high level of graphite and synergistic EP-additives and antioxidants designed particularly for hydraulic hammer lubrication, pin and bush type of applications on large earth moving and general off-road heavy plant machinery.
Multivis ECO FE 0W-20 is recommended for passenger car engines, including turbo-charged and
supercharged versions, requiring a low viscosity grade.
Multivis ECO FE 0W-20 is a low viscosity, high performance engine oil that has been formulated primarily for use in Ford’s 1.5L EcoBlue turbodiesel units.
K90 Calcium Sulphonate Complex Grease has been developed as a high performance grease for constructionplant such as bulldozers, scrapers, loading shovels and dump trucks where it will give outstanding performance.It is also recommended for use in industrial equipment operating at high temperatures or exposed to salt water.
Multivis ADT RN 5W-30 has been specifically formulated to cope with the demands of Renault vehicles produced after 2018 and fitted with their latest gasoline and diesel engines. This product also covers the requirements of older units where RN0700 and RN7
Race 4T 5W-40 is recommended for all turbo-charged and naturally aspirated racing engines and super bikes or where the manufacturer specifies an oil of this type and specification.
Race ATV 10W-40 is recommended for use in all-terrain vehicles, quad bikes, generator sets and other
ancillary equipment, where a product of this type and viscosity grade is specified.
Versimax HD17 5W-30 is designed for use in diesel engines meeting Euro IV, V and VI emission requirements where an oil of this quality is specified.
Multivis ADT DV 5w-30 Fully Synthetic, Low Speed Pre-ignition (LSPI)
Multivis ECO PV 0W-20 is a low viscosity passenger car engine oil that provides advanced fuel economy performance coupled with outstanding wear protection and cleanliness under a wide variety of driving conditions.
Versimax HD14 10W-30 has been developed for use in diesel engines fitted with exhaust gas re-circulation (EGR), selective catalytic reduction (SCR – Adblue) NOx reduction systems, diesel oxidation catalysts (DOC) and diesel particulate filters (DPF). Versimax HD14 10W-30 has been designed to cope with increased levels of bio-fuel and their effect in the engine.
Race 4T 10W-30 is recommended for the majority of high performance four stroke motorcycles, where a product of this type and specification is demanded. Safe for use in wet clutch systems.
Magnol HVI46 is a high viscosity index hydraulic oil, formulated from high quality base oils and powerful anti-wear technology. It is ideal for hydraulic systems subjected to the very extremes of operating conditions and temperatures
Multitrans VTS is a highly versatile transmission fluid that allows for rationalisation whilst providing high levels of component protection and system efficiency.
Golden Film 80W-90 is ideal for gearboxes and axles fitted to vehicles built in the 1960s, 1970s, 1980s and 1990s, where an API GL4, API GL5, SAE 80W-90 or SAE 90 is specified.
Faracut HS3 is a highly refined cutting oil with special lubricity additives to enhance cutting without the use of Chlorine, Sulphur or Phosphorus.
Multitrans MTS 75W-90 is an advanced, fully synthetic gear oil developed for use in automotive lightduty and heavy duty axles and heavy-duty non-syncronised manual transmissions.
Versimax HD11 5W-30 is a top tier heavy duty diesel specific engine oil that has been designed to meet the necessary chemical limits required to maintain the efficiency of exhaust aftertreatment devices, including: DPF’s (diesel particulate filters), SCR (Adblue) / EGR NOX reduction systems, diesel oxidation catalysts (DOCs) and Adblue Slip-Catalysts.
Versimax HD12 15W-40 is a mid-SAPS heavy duty diesel engine oil, manufactured from Group II base fluids. This product contains an advanced additive package formulated to provide the utmost protection when operating in very severe conditions with extended drain intervals.
Multivis ADT C3 5W-40 is a mid-SAPS (Sulphur, Ash, Phosphorus) synthetic multigrade engine oil
Multivis ADT FD 5W-30 is a synthetic tehnology engine oil specially formulated to meet the superior performance and fuel efficiency requirements of the latest generation of Ford diesels
Multivis CST SS 10W-40 is a semi-synthetic engine oil manufactured from advanced Group II and Group III base fluids and the latest additive technology.
Multivis CST FB 5W-30 is a semi-synthetic multigrade engine oil specially formulated to meet the superior performance and fuel efficiency requirements of modern engines requiring low viscosity oils
Multivis MLR 10W-60 is a fully synthetic multigrade motor oil developed directly from motor racing technology
Multivis MLR 10W-50 is a fully synthetic multigrade motor oil developed directly from motor racing technology
Multivis ECO-S 0W-20 is a high performance fully synthetic engine oil formulated to cope with the exacting demands of OEMs requiring low viscosity engine oils.
Multivis ECO V 0W-30 is an engine oil providing not only the potential for fuel savings but a high level of component protection under a wide range of operating conditions in passenger cars or light commercial vehicles.
Multivis ECO FB 5W-20 has been specifically developed for use in Ford’s latest fuel efficient petrol engines
Multivis ADT C1 5W-30 is a low-SAPS, synthetic technology engine oil formulated to meet the demands and fuel efficiency expectations of the latest petrol and diesel engines, where a low viscosity oil is required.
Multivis ADT C2 5W-30 is a mid-SAPS (Sulphur, Ash, Phosphorus) synthetic based multigrade engine oil
Multivis ADT C3 5W-30 is a mid-SAPS (Sulphur, Ash, Phosphorus) synthetic multigrade engine oil
Multivis ADT C4 5w-30 Fully Synthetic, Low SAPS Engine Oil
Multivis ADT VX 5W-30 is a synthetic technology advanced lubricant, designed for use in the latest engines, including those fitted with exhaust gas after-treatment devices.
Liquimatic D46 is recommended for both Industrial and off highway hydraulic systems, where extreme operating conditions are encountered.