Industrial

As one of Europe’s leading manufacturers of industrial lubricants we have been delivering lubricant innovation for over 140 years.

Our range of industrial products has been specifically formulated to meet the tough demands of a modern manufacturing facility, reducing wear and increasing operating efficiency within critical machinery, processes and components. These include hydraulic systems, compressors, industrial gearboxes and bearings.

£10.36 (£12.43 inc VAT)
Anti-Corrosion, Anti-wear, Heat Resistant, Water Resistant, Zinc, Calcium, Aerosol 400 Ml

Workshop Pro White Spray Grease is a combination of a Calcium and Zinc based grease in an aerosol form offering good resistance to water and heat.

In Stock

£24.60 (£29.52 inc VAT)
5 litre, 25 litre, Car & Van, Autosport, Agricultural, Automotive, Vintage & Classic Cars, Steam, Motorcycle, Marine, Horticultural, Fleet, Construction, Cleaning Fluid, CAD005 - 5 Ltr

Workshop  Pro Traffic Film Remover is  a unique combination of surface active agents, sequestrants and alkaline builders that can be used for car & lorry cleaning by brush wash or automatic brush wash. It can also be used in the cleaning of light and heavy soils from the likes of concrete floors, metal surfaces and driveways (except Tarmacadam).  It may also find use in the removal of temporary corrosion inhibitors from metal surfaces. Dilutions for these applications are to be determined on an individual basis, based on the degree of soiling, method of application et cetera. 

In Stock
 

£13.63 (£16.36 inc VAT)
Silicone, Aerosol 400 Ml, Car & Van, Autosport, Automotive, Agricultural, Industrial, Vintage & Classic Cars, Steam, Motorcycle, Marine, Horticultural, Fleet, Construction, Maintenance Product, PRI400 - 400 ml

Workshop Pro Surface Conditioner is a special blend of silicone, solvents and cleaners. 

In Stock
 

£9.97 (£11.96 inc VAT)
Car & Van, Autosport, Automotive, Agricultural, Industrial, Vintage & Classic Cars, Steam, Motorcycle, Marine, Horticultural, Fleet, Construction, Aerosol 400 Ml, PAV400 - 400 ml

Workshop Pro Solvent Degreaser is a ready for use, pink coloured emulsifiable fluid, manufactured from a highly refined hydrocarbon solvent and a non-ionic surfactant.

In Stock
 

£10.91 (£13.09 inc VAT)
Car & Van, Autosport, Automotive, Agricultural, Industrial, Vintage & Classic Cars, Steam, Motorcycle, Marine, Horticultural, Fleet, Construction, Aerosol 400 Ml, SOL400 - 400 ml

Solvent Cleaner Aerosol. A complex mixture of hydrocarbon and oxygenated solvents designed to clean and degrease all flat and irregular surfaces.

In Stock
 

£11.65 (£13.98 inc VAT)
Semi-Synthetic, Aerosol 400 Ml, Car & Van, Autosport, Agricultural, Automotive, Industrial, Vintage & Classic Cars, Motorcycle, Marine, Horticultural, Fleet, Construction, Maintenance Product, CCL400 - 400 ml

Workshop Pro Semi-synthetic Chain Lubricant is a specially formulated aerosol designed for the protection of chains used in a variety of applications.

In Stock
 

£41.39 (£49.67 inc VAT)
Solvent Free, 5 litre, Industrial, Autosport, Food Preparation, Agricultural, Vintage & Classic Cars, Steam, Motorcycle, Model Engineering, Marine, Horticultural, Fleet, Plant, Construction, Automotive, Car & Van, Skin Care
WORKSHOP PRO PREMIUM HAND CLEANSER Description Workshop Pro Premium Hand Cleanser is a concentrated hand cleaner produced with natural abrasives for the...
In Stock

£21.00 (£25.20 inc VAT)
1 litre, Construction, Car & Van, Plant, Agricultural, Automotive, Industrial, Steam, Motorcycle, Model Engineering, Marine, Horticultural, Fleet, Skin Care, BAR001 - 1 Litre
WORKSHOP PRO PREMIUM BARRIER CREAM Description Premium Barrier Cream is a non-fatty skin protection lotion that is dispersed easily and...
In Stock
 

£20.00 (£24.00 inc VAT)
Plant, Construction, Automotive, Car & Van, Industrial, Agricultural, Food Preparation, Vintage & Classic Cars, Steam, Motorcycle, Model Engineering, Marine, Horticultural, Fleet, 1 litre, Skin Care, PAL001 - 1 Litre
WORKSHOP PRO PREMIUM AFTER-WORK LOTION Description Premium After-work Lotion is a light fatty skin care lotion that is dispersed easily and...
In Stock
 

£8.60 (£10.32 inc VAT)
Anti-Corrosion, Water Resistant, 5 litre, Aerosol 400 Ml, Automotive, Agricultural, Industrial, Vintage & Classic Cars, Steam, Motorcycle, Marine, Horticultural, Fleet, Construction, Car & Van, Autosport, MDF400 - 400 ml

MD-4 is an effective, damp start and penetrating fluid with outstanding corrosion protection properties.

In Stock
 

£13.55 (£16.26 inc VAT)
Fully Synthetic, Aerosol 400 Ml, Motorcycle, FSC400 - 400 ml

Workshop Pro Fully Synthetic Chain Lubricant is a specially formulated aerosol designed for the protection of chains used in a variety of applications.

In Stock
 

£30.27 (£36.32 inc VAT)
Solvent Free, Synthetic detergent, 5 litre, Marine, Agricultural, Automotive, Industrial, Food Preparation, Skin Care

A powerful heavy-duty hand cleanser containing environment friendly micro-particles for the effective removal of ingrained dirt, grease and grime. Free from petroleum derived solvents but designed to outperform traditional solvent based hand cleansers.

In Stock

£12.50 (£15.00 inc VAT)
Marine, Car & Van, Autosport, Automotive, Vintage & Classic Cars, Motorcycle, Aerosol 400 Ml, CAR400 - 400 ml

A selected treatment designed to remove dirt, grime and accumulated oily deposits from carburettors and fuel injection systems.

In Stock
 

£11.48 (£13.78 inc VAT)
Anti Seize, Aerosol 400 Ml, Autosport, Automotive, Agricultural, Industrial, Vintage & Classic Cars, Steam, Motorcycle, Marine, Horticultural, Fleet, Construction, Car & Van, Maintenance Product, PSE400 - 400 ml

Workshop PRO Anti-Seize is a lead and CFC free compound, made from solvent refined oil, Bentonite thickener and fine copper powder.

In Stock
 

£105.97 (£127.16 inc VAT)
Zinc, Mineral, ISO VG68, 25 litre, Horticultural, Construction, Agricultural, Industrial, Hydraulic Oil, TRS025 - 25 Ltr

Triad 68 Hydraulic Oil is recommended for both Industrial and off highway hydraulic systems. Other applications include: machining centre headstocks, centralised lubrication systems, suspension units, tipping gear, jacks, PTOs, et cetera

In Stock
 

£29.41 (£35.29 inc VAT)
Zinc, Mineral, ISO VG46, 5 litre, 25 litre, Horticultural, Construction, Agricultural, Industrial, Hydraulic Oil, TRF005 - 5 Ltr

Triad 46 is recommended for both Industrial and off highway hydraulic systems. Other applications include: machining centre headstocks, centralised lubrication systems, suspension units, tipping gear, jacks, PTOs, et cetera.

In Stock
 

£29.41 (£35.29 inc VAT)
Zinc, Mineral, ISO VG32, 5 litre, 25 litre, Horticultural, Construction, Agricultural, Industrial, Hydraulic Oil, TRI005 - 5 Ltr

Triad 32 is recommended for both Industrial and off highway hydraulic systems. Other applications include: machining centre headstocks, centralised lubrication systems, suspension units, tipping gear, jacks, PTOs, et cetera.

In Stock
 

£169.01 (£202.81 inc VAT)
25 litre, Industrial, Dielectric Fluid, Transformer oil, TFO025 - 25 Ltr

Morris Lubricants Transformer Oil is a highly refined naphthenic product

In Stock
 

£136.81 (£164.17 inc VAT)
Mineral, 25 litre, Industrial, Mould Release Oil, TZM025 - 25 Ltr

Terza M-107 is a high quality low viscosity mould release oil containing low odour hydrocarbon solvent, reactive fat and lubricity additives.

In Stock
 

£140.17 (£168.20 inc VAT)
Mineral, ISO VG5, 25 litre, Industrial, Mould Release Oil, TMO025 - 25 Ltr

Terza 7060 is a high quality low viscosity mould release oil

In Stock
 

£318.06 (£381.67 inc VAT)
Vegetable Oil, 25 litre, Industrial, Model Engineering, AOL025 - 25 Ltr

Terralus AIR-O-LUBE Air Mist Coolant

In Stock
 

£136.94 (£164.33 inc VAT)
Mineral, 25 litre, Industrial, Spark Erosion Fluid, Mould Release Oil, Degrease Fluid, Dielectric Fluid, TOK025 - 25 Ltr
Tabor OK is a low odour, relatively high flash point hydrocarbon fluid that finds use in a variety of applications.
In Stock
 

£144.66 (£173.59 inc VAT)
Mineral, ISO VG22, 25 litre, Industrial, Mould Release Oil, TAB025 - 25 Ltr

Tabor 95 Mould Release Oil is recommended as a concrete release agent for use with all steel and wooden moulds, especially those used for continuous production of slabs and paving.

In Stock
 

£241.10 (£289.32 inc VAT)
Non-staining on Copper, Biostable, Excellent hard water stability , All round corrosion inhibition, Excellent Lubricity, Multi metal capability, Semi-Synthetic, 25 litre, Industrial, Soluble Cutting Fluid, Coolant, EPF025 - 25 Ltr

Supersaw is a micro-emulsion, biocide protected, water soluble cutting fluid. It forms a very stable emulsion, even with hard water, and incorporates extreme pressure additives for enhanced cutting performance. 

In Stock
 

£199.35 (£239.22 inc VAT)
Water Miscible, Excellent operator visibility, Rapid release of fines , Low foaming, Resist Bacterial Degradation, Extended Sump life, Excellent rust and corrosion protection, Sulphur free, Phenol free, Nitrite Free, Fully Synthetic, 25 litre, Industrial, Grinding Oil

Supergrind Ultra is a premium quality versatile fully synthetic clear grinding fluid

In Stock

£236.69 (£284.03 inc VAT)
Low foaming tendency in soft water areas, Water Miscible, Superior flushing and cooling characteristics, Fully Synthetic, 25 litre, Industrial, Grinding Oil, SSW025 - 25 Ltr

Supergrind SW is a fully synthetic water-mix grinding fluid that forms a true solution when diluted with water.

Supergrind SW is formulated to have a very low foaming tendency, even when used with soft water.

In Stock
 

£219.00 (£262.80 inc VAT)
Fully Synthetic, 25 litre, Industrial, Soluble Cutting Fluid, Grinding Oil

Supergrind Plus is a fully synthetic grinding fluid

In Stock

£188.07 (£225.68 inc VAT)
Water Miscible, High corrosion protection, Rapid release of fines , Low foaming, Resist Bacterial Degradation, Extended Sump life, Multi metal capability, Fully Synthetic, 25 litre, Industrial, Grinding Oil, SMP025 - 25 Ltr

Supergrind MP is a fully synthetic water mix grinding fluid offering extended sump life.

In Stock
 

£346.39 £304.50 (£365.40 inc VAT)
Water Miscible, High corrosion protection, Suppresses cobalt leaching , Free from Amines, Boron Free, Biostable, Nitrite Free, Fully Synthetic, 25 litre, Industrial, Grinding Oil, SCG025 - 25 Ltr

Supergrind CG is a specially developed water miscible fluid for all forms of carbide tooling.

In Stock
 

£244.46 (£293.35 inc VAT)
Non-staining to aerospace alloys, Enhanced bacterial, fungal and tramp oil tolerance, Free from nitrites, phenols, triazine or chlorinated additives , Low foaming, Extended Sump life, Multi metal capability, Excellent surface finishing, Ester Fortified, Semi-Synthetic, 25 litre, Industrial, Soluble Cutting Fluid, Coolant, SUG025 - 25 Ltr

Supercut G is a highly sophisticated semi-synthetic micro-emulsion cutting fluid incorporating the latest in performance additive technology.

In Stock
 

£246.68 (£296.02 inc VAT)
Non-staining to aerospace alloys, Enhanced bacterial, fungal and tramp oil tolerance, Ester fortified semi-synthetic formulation , Free from nitrites, phenols, triazine or chlorinated additives , Low foaming, Extended Sump life, Improved machine cleanliness , Excellent surface finishing, Ester Fortified, Semi-Synthetic, 25 litre, Industrial, Model Engineering, Soluble Cutting Fluid, Coolant, SUE025 - 25 Ltr

Supercut 8000 is a highly sophisticated, semi-synthetic, micro emulsion specially designed for heavy duty machining applications in moderate to hard diluent waters (water hardness 150 – 350ppm CaCO3).

In Stock
 

£242.38 (£290.86 inc VAT)
Exceptional Resistance to Bacterial Degradation , Excellent Cooling Power, High Level of Extreme Pressure and Lubricity Additives, Adapted for a wide range of Machine Feeds and Speeds, Extended Sump life, Semi-Synthetic, 25 litre, Industrial, Soluble Cutting Fluid, SXL025 - 25 Ltr

Supercut 6000 has been developed to supply the modern machine workshop with a single versatile product to cope with a wide range of machining operations.

In Stock
 

£52.00 (£62.40 inc VAT)
Low foaming, Excellent Lubricity, Resist Bacterial Degradation, Extended Sump life, Multi metal capability, Chlorine free, Mineral, 5 litre, 25 litre, Industrial, Model Engineering, Soluble Cutting Fluid, SUN005 - 5 Ltr

Supercut 4000 is a semi-synthetic, micro-emulsion metalworking fluid. It is readily miscible with most mains water to produce a translucent green emulsion that is suited to a wide variety of applications

In Stock
 

£194.52 (£233.42 inc VAT)
Low Oil Content, Low foaming, Excellent Lubricity, Resist Bacterial Degradation, Extended Sump life, Multi metal capability, Chlorine free, Semi-Synthetic, 25 litre, Industrial, Model Engineering, Soluble Cutting Fluid, SBL025 - 25 Ltr

Supercut 3000 is a micro-emulsion metalworking fluid that is readily miscible with most mains water producing a transparent blue emulsion that is suited to a wide variety of applications.

In Stock
 

£189.52 (£227.42 inc VAT)
Resist Bacterial Degradation, Extended Sump life, Resists Tramp oil, Multi metal capability, Excellent rust and corrosion protection, Extreme Pressure, Mineral, 25 litre, Industrial, Model Engineering, Soluble Cutting Fluid, SEP025 - 25 Ltr

Supercut 2000 is an extreme pressure, micro-emulsion metal working fluid.

In Stock
 

£40.27 (£48.32 inc VAT)
Chlorine free, Low Odour, Phenol free, Nitrite Free, Mineral, 5 litre, 25 litre, Industrial, Model Engineering, Soluble Cutting Fluid, UNI005 - 5 Ltr

Supercut 1000 is a water soluble metalworking fluid of the traditional type.

In Stock
 

£79.86 (£95.83 inc VAT)
Fungicides, Bactericides , Mineral, 5 litre, Industrial, Model Engineering, Cleaning Fluid
For Machine tool sump maintenance & Overhaul.
 

 

 

In Stock

£178.50 (£214.20 inc VAT)
Zinc free, Excellent Lubricity, Chlorine free, Low misting, Extreme Pressure, ISO VG32, 25 litre, Industrial, Cutting Oil

Sulto PX30 is a low odour, light coloured chlorine free, neat cutting fluid suitable for use on both ferrous and non-ferrous alloys

In Stock

£187.27 (£224.72 inc VAT)
Mineral, 25 litre, Industrial, Fleet, PUM025 - 25 Ltr

Seria ISO 4113 Calibration Fluid is suitable for all types of power driven and hand operated pump
test stands and nozzle testing apparatus.

In Stock
 

£348.25 £285.75 (£342.90 inc VAT)
Air Mist Coolant, Neat Cutting Oil, Ester based, 25 litre, Industrial, Cutting Oil

A low viscosity, thermally stable, ester based lubricant for use on aluminium ingot and bar for sawing applications.

The product may be applied by air mist lubricator or by flood application.

In Stock

£131.70 (£158.04 inc VAT)
High Temperature, Fully Synthetic, 5 litre, 25 litre, Industrial, Chain Lubricant, SCL005 - 5 Ltr

S-3403 is a special synthetic chain lubricant specifically designed for use in high temperatures

In Stock
 

£28.95 (£34.74 inc VAT)
Extreme Pressure, Lithium , Mineral, NLGI 2, 120 ml, Industrial, Grease, KFT120 - 1 Unit

The Morrgrease single point automatic lubricator is filled with premium quality multipurpose grease. Supplying a continuous and precise volume of grease, the Morrgrease product provides users with the optimum lubrication that can be used in many different applications. As a cost-effective alternative to manual lubrication, the Morrgrease Automatic Lubricator can help to prolong asset life and reduce downtime.

The Morrgrease Automatic Lubricator holds 120ml of multipurpose grease.

In Stock
 

£38.10 (£45.72 inc VAT)
Low Pour Point, Low volatility, High Viscosity Index, Mineral, ISO VG68, 25 litre, 5 litre, Industrial, Agricultural, Vacuum Pump Oil, VPO005 - 5 Ltr

Milking Machine Vacuum Pump Oil is suitable for use in a variety of pumps designs operating in all temperatures and conditions. Also recommended for the lubrication of associated milk handling hydraulics and equipment.

In Stock
 

£19.50 (£23.40 inc VAT)
Multi metal capability, Neat Cutting Oil, Extreme Pressure, Mineral, 500 Ml, Industrial, Thread Lubricant, Cutting Oil, MCL500 - 500ml

MCT Liquid advanced extreme pressure metal cutting products

In Stock
 

£185.05 (£222.06 inc VAT)
Mineral, 25 litre, Industrial, Model Engineering, MAT025 - 25 Ltr

Marcia T is a heavy duty EP neat cutting oil

In Stock
 

£179.44 (£215.33 inc VAT)
Low misting, Low viscosity, High Lubricity, Extreme Pressure, Active Sulfur, 25 litre, Industrial, Model Engineering, Cutting Oil, MAH025 - 25 Ltr

Marcia H is a specialist honing oil containing extreme pressure and lubricity additives

In Stock
 

£710.69 (£852.83 inc VAT)
Low viscosity, Low Odour, Neat Cutting Oil, Extreme Pressure, Mineral, 205 Litre, Industrial, Model Engineering, Cutting Oil

Marcia F has been developed as a low viscosity, extreme pressure neat oil, suited to a wide variety of applications, particularly involving ferrous alloys

In Stock

£189.53 (£227.44 inc VAT)
Mineral, 25 litre, Industrial, Model Engineering, MDE025 - 25 Ltr

Marcia DE is a heavy duty neat cutting oil containing high levels of extreme pressure additives

In Stock
 

Products