Classic & Steam

Sovereign Straight Steam Cylinder Oils are refined to give film strength at very high temperatures, providing excellent lubrication where needed to protect bores and valves. 

K6 is a premium quality, water resistant grease. It is recommended for the lubrication and protection of brake backing plates and plunger housings. It can also be used as a general industrial grease in wet and humid atmospheres.

A general purpose disinfectant with powerful sanitising action and pleasant lavender odour. Formulated to QAP 50 standard. Suitable for use on floors, walls, drains and in toilet areas. Lento has been used widely in kennels, stables, farms, land fills and any area where animals are kept on hard standing.

Golden Film SAE 20 Classic Motor Oil is a high quality, low detergent/dispersant monograde lubricant

Morris Lubricants Diesel Fuel Treatment has been formulated to protect and clean the entire fuel system and keep it clean. Additionally, Diesel Fuel Treatment will clean up intake valves and reduce combustion chamber deposits, further contributing to efficiency, improved power and reduced emissions.

Workshop Pro Fully-synthetic Chain Lubricant is a specially formulated aerosol designed for the protection of chains used in a variety of applications. It is recommended for use on motorcycle chains, lift & drive chains, leaf & roller chains, conveyor system chains, et cetera.

Steam Car Compound 1000 has been specifically formulated for use in non-condensing models and with the co-operation of Stanley Steam Car owners. This advanced formulation not only ensures the correct lubrication of cylinders but also good visibility in the ‘Winker’. This product can be used in all steam engines working up to pressures in excess of 250lbs per square inch, with either saturated or superheated steam. Meets the specification requirements of British Rail schedule number MT276.

Alto Machine Oils are a versatile range of oils that can be used wherever a straight mineral oil with modest additive treatment has been specified. Alto 460, 680 and 1000 can also be used as steam cylinder oils when condensate recovery is required.

Ankor RR Is recommended for all general purpose de-watering applications where some

limited corrosion protection is required afterwards. It is also recommended as a general
purpose inter-operational corrosion protective and as a short to medium term corrosion
protective under indoor storage conditions. It is suitable for protection of all bright steel bars,
sheets and sections and for protection of non-ferrous alloys against oxidation.

Golden Film SAE 30 Classic Motor Oil is recommended for use in veteran, classic and vintage cars, motorcycles, commercial vehicles and tractors, where engine design and tolerances prohibit the use of modern multigrade, high additive level oils.

Lydian Degreaser is a ready for use, blue coloured emulsifiable fluid, manufactured from a
mixture of hydrocarbon solvents and a non-ionic detergent.

Recommended for removal of oil grease and dirt from metal, paintwork and concrete.

Developed for full size steam engines operating on the national rail network and Sentinel S Type waggons where true superheat conditions are experienced on longer hauls i.e. up to 650°F. 

Workshop Pro Solvent Degreaser is a ready for use, pink coloured emulsifiable fluid, manufactured
from a highly refined hydrocarbon solvent and a non-ionic surfactant.

Magnesium alloys without fears of corrosion or corrosive residues on the surface.

Petrol Fuel Treatment is a high-performance fuel additive formulated to clean and maintain petrol engine fuel systems

Suitable for use in all petrol/gasoline engines, including Carburetted systems, Fuel-injected engines, Turbocharged engines

Alto Machine Oils are a versatile range of oils that can be used wherever a straight mineral oil with modest additive treatment has been specified. Alto 460, 680 and 1000 can also be used as steam cylinder oils when condensate recovery is required.

Ankor ST is recommended as a short-term de-watering corrosion preventative for parts stored under
cover outdoors and as a short to medium term corrosion preventative for indoor use. It is also
particularly suitable for use as an inter-optional corrosion preventative for the de-watering and
protection of machined components prior to subsequent treatment. Ankor ST is recommended for the short to medium term protection of bright steel wire, bars, billets and sheet

Golden Film SAE 40  Classic Motor Oil is recommended for use in veteran, classic and vintage cars, motorcycles, commercial vehicles and tractors, where engine design and tolerances prohibit the use of modern multigrade, high additive level oils

Workshop Pro Surface Conditioner is a special blend of silicone, solvents and cleaners. It has been

designed as a multipurpose product that cleans, restores and protects surfaces at the same time. 

It is easy to use and gives a like new finish to all kinds of surfaces including vinyl, plastic, wood, chrome & stainless steel

K40EP is recommended for gears, plain and anti-friction bearings where an NLGI 0 is specified and for industrial and agricultural purposes where the use of a semi fluid or very soft product is essential or desirable.

This non staining, robust formulation is able to withstand high piston speeds, superheat

temperatures and through the use of unique, highly efficient surface additives, impart rust

resistance during operation and long after shutdown.

Alto Machine Oils are a versatile range of oils that can be used wherever a straight mineral oil with modest additive treatment has been specified. Alto 460, 680 and 1000 can also be used as steam cylinder oils when condensate recovery is required.

Golden Film SAE 50 Classic Motor Oil is recommended for use in veteran, classic and vintage cars, motorcycles, commercial vehicles and tractors, where engine design and tolerances prohibit the use of modern multigrade, high additive level oils

K41EP Lithium Grease is a premium quality multipurpose grease for use in anti-friction and plain bearings subjected to high shock load and vibration conditions used extensively for applications throughout industry and the automotive sector. 

Workshop Pro Anti-Seize is a lead and CFC free compound, made from solvent refined oil, Bentonite thickener and fine copper powder. The product is highly recommended as a thread lubricant on the external parts of all racing motorcycles, where rapid and trouble free disassembly by pit crews is a competitive essential.

Ankor Wax is recommended for medium and long term corrosion protection applications. This product is highly recommended for protecting bright steel wire, bars, billets, sections and sheets during long term storage and transport. It many also be used as an underbody protective

K42EP Lithium Grease is a premium quality multipurpose grease for use in anti-friction and plain bearings subjected to high shock load and vibration conditions used extensively for applications throughout industry and the automotive sector. 

Click on image or Select a pack size below to see available pack options!

Workshop Pro Solvent Cleaner is a powerful residue-free solvent degreaser and brake cleaner.

A complex mixture of hydrocarbon and oxygenated solvents designed to clean and degrease all flat and irregular surfaces & is free from chlorinated and other ozone depleting solvents

Golden Film SAE 20W-50 Classic Motor Oil is recommended for use in veteran, classic and vintage cars, motorcycles, commercial vehicles and tractors, where engine design and tolerances prohibit the use of modern high additive level oils. 

K43EP is a high quality NLGI 3 Lithium grease suitable for a wide range of plain and rolling bearings used within given temperature limits & is used extensively for applications throughout industry and the automotive sector.

K43EP is currently in British mainline applications as follows:

• Carriage wheel sets using Commonwealth, B4 and B5 passenger bogies.
• Class 37/47/50/56 locomotive axle bearings and suspension tubes on freight and passenger duties.

K43EP is also used extensively on Heritage Railway lines where a grease of this type is specified.

Click on image or Select a pack size below to see available pack options!

K48 is specially formulated for use in industrial equipment, cars, vans, trucks and construction plant such as bulldozers, scrapers, loading shovels and dump trucks where it will give superior performance, in all industrial plain and rolling element bearing.

Click on image or Select a pack size below to see available pack options!

Golden Film Classic Motorsport SAE 15W-50 is an ideal choice for classic and vintage cars that are raced competitively. This grade has been proven on the track and will provide impressive oil pressure and bearing protection under high load and high temperatures. Makes include: Mini, MG, Austin Healey, Jaguar, Ford, Aston Martin. 

Golden Film Classic Motorsport SAE 15W-50 is also suitable for older engines (1950’s, 1960’s) that have been rebuilt and a full flow cartridge filter has been added.

Golden Film 10W-40 is suitable for use in passenger cars and light commercial vehicles from 1980s & early 1990s, that may have originally specified a 10W-40 or where engines have been rebuilt or restored.