Industrial

Ankor D is recommended for all short and medium term rust proofing. It is particularly suitable for use in machine shops as an inter operation rust preventative for wet parts. This product is also highly recommended for protecting bright steel wire, bars, billets, sections and sheets during storage and transport

The ARIA EP range are specifically designed for the lubrication of percussion type air tools, they have low pour points and special additives to protect against rust, corrosion and water washing. They have excellent anti-wear and EP properties, a vital antifogging agent to maintain a healthy working environment and an anti-foamant to facilitate the rapid release of air from the oil.

Workshop Pro Carb Cleaner removes stubborn lacquer and dirt from carburetors, fuel injection

systems and automatic chokes.

areas and inlet valve

Lodexol ISO 150 Industrial Gear Oil

Lodexol FS 320 Fully Synthetic Industrial Gear Oil

Lodexol PG 320 Polyalkylene Glycol Industrial Gear Oil

K15 is recommend for open gears, particularly those in exposed locations such as docks, harbours, waterways, railways, mines and construction sites. Also recommended for wire ropes and sheaves, chains, pulleys and exposed plain bearings.

Supercut 3000 is a micro-emulsion metalworking fluid that is readily miscible with most mains water producing a transparent blue emulsion that is suited to a wide variety of applications.

S-3403 is a special synthetic chain lubricant specifically designed for use in high temperatures and other adverse conditions where conventional lubricants would fail.

Recommended for all chain drives working in high temperatures and difficult conditions.
Particularly recommended for duplex or triplex roller chains and inverted tooth and compact
drives where cooling is a problem.

Astra 100 Slideway Oil has been replaced by Astra 150

Supergrind Plus is recommended for all grinding applications where a synthetic grinding fluid is desirable or recommended. It is particularly suited to those systems where foaming, fines separation and wheel glazing problems have been experienced with other formulae. Supergrind Plus is particularly suitable for achieving very fine surface finishes (micro inch finishes).

Tabor 95 Mould Release Oil is recommended as a concrete release agent for use with all steel and wooden moulds, especially those used for continuous production of slabs and paving.

Triad 68 Hydraulic Oil is recommended for both Industrial and off highway hydraulic systems. Other applications include: machining centre headstocks, centralised lubrication systems, suspension units, tipping gear, jacks, PTOs, et cetera

Samoa - Double handed grease gun c/w flexible outlet. Fits to our 500 gm screw in cartridges

Faracut HS3 is a highly refined cutting oil with special lubricity additives to enhance cutting without the use of Chlorine, Sulphur or Phosphorus.

151 100 High pressure grease pump suitable for12.5 to 18 kg kegs. Manual lever pump with 1.5 M hose, rigid stem & 4 Jaw connector.

Alto Machine Oils are a versatile range of oils that can be used wherever a straight mineral oil with modest additive treatment has been specified. 

Ankor RR Is recommended for all general purpose de-watering applications where some

limited corrosion protection is required afterwards. It is also recommended as a general
purpose inter-operational corrosion protective and as a short to medium term corrosion
protective under indoor storage conditions. It is suitable for protection of all bright steel bars,
sheets and sections and for protection of non-ferrous alloys against oxidation.

Astra Slideway Lubricants have been specifically developed for the lubrication of machine tool slideways and tables.

Workshop Pro Semi-synthetic Chain Lubricant is a specially formulated aerosol designed for the protection of chains used in a variety of applications. It is recommended for use on motorcycle chains, lift & drive chains, leaf & roller chains, conveyor system chains, et cetera.

K25 has been specially formulated for use on fifth wheel plates. It can also be used for heavy duty applications in industrial equipment, trucks and construction plant such as bulldozers, scrapers, loading shovels and dump trucks where a graphited grease is recommended.

Lodexol FS 460 Fully Synthetic Industrial Gear Oil

Lodexol ISO VG 220 Industrial Gear Oil is a high quality mineral oil with extreme pressure (EP) additives, intended for use in industrial gear systems of the spur, helical and straight and spiral bevel types.

Marcia D is a multipurpose neat cutting oil containing extreme pressure and lubricity additives developed especially for use in medium to heavy duty applications on free cutting, medium tensile, certain stainless steels and many non-ferrous alloys.

Lodexol PG 460 polyalkylene glycol industrial gear oil

Supergrind SW is a fully synthetic water-mix grinding fluid that forms a true solution when diluted with water.

Supergrind SW is formulated to have a very low foaming tendency, even when used with soft water.

Supercut 4000 is a semi-synthetic, micro-emulsion metalworking fluid. It is readily miscible with most mains water to produce a translucent green emulsion that is suited to a wide variety of applications

Morris Lubricants Transformer Oil is an uninhibited,  highly refined naphthenic product for use solely in oil filled transformers and other electrical equipment. 
It is recommended for use as a dielectric and coolant in all oil filled transformers, switchgear, welders and other electrical equipment.

Terza M-107 is a high quality low viscosity mould release oil containing low odour hydrocarbon solvent, reactive fat and lubricity additives.
Recommended for use as a concrete mould release and for the protection of moulds. Particularly suitable for the continuous production of roof tiles and where a non-staining oil is essential.

Liquimatic VG5 is a low viscosity ashless hydraulic oil with anti-wear properties. 

It is ideal for lubricating high-speed zero clearance bearings on grinding machines and other
applications, where a low viscosity grade of this type is requested

Grease Filler pump for centralized greasing systems, 12 - 18 kg kegs

Lift action pump for the transfer of lubricants from our 25 litre metal drums.

* Does not fit our 20 litre antifreeze drums *

Alto Machine Oils are a versatile range of oils that can be used wherever a straight mineral oil with modest additive treatment has been specified.

Arcato R 68 Refrigeration Oil is recommended for use in all commonly found domestic, commercial, and industrial refrigeration and freezer systems, and all air conditioning systems (except in rare cases where a synthetic oil has been specified). They are compatible with commonly used HCFC, CFC and ammonia refrigerants.

Ankor ST is recommended as a short-term de-watering corrosion preventative for parts stored under
cover outdoors and as a short to medium term corrosion preventative for indoor use. It is also
particularly suitable for use as an inter-optional corrosion preventative for the de-watering and
protection of machined components prior to subsequent treatment. Ankor ST is recommended for the short to medium term protection of bright steel wire, bars, billets and sheet

Workshop Pro Fully-synthetic Chain Lubricant is a specially formulated aerosol designed for the protection of chains used in a variety of applications. It is recommended for use on motorcycle chains, lift & drive chains, leaf & roller chains, conveyor system chains, et cetera.

Liquimatic No 1 is a zinc free, ISO VG 10 Hydraulic Oil formulated with Group II base fluids incorporating ashless additive technology.

Lodexol ISO 320 Industrial Gear Oil

Marcia DE is a heavy duty neat cutting oil containing high levels of extreme pressure additives

K40EP is recommended for gears, plain and anti-friction bearings where an NLGI 0 is specified and for industrial and agricultural purposes where the use of a semi fluid or very soft product is essential or desirable.

Astra Slideway Lubricants have been specifically developed for the lubrication of machine tool slideways and tables.

Supergrind Ultra is a premium quality versatile fully synthetic clear grinding fluid

Supercut 6000 has been developed to supply the modern machine workshop with a single versatile product to cope with a wide range of machining operations.

Terza 7060 is a high quality low viscosity mould release oil containing solvent refined mineral oil,

hydrocarbon solvent and lubricity additives.

A general purpose disinfectant with powerful sanitising action and pleasant lavender odour. Formulated to QAP 50 standard. Suitable for use on floors, walls, drains and in toilet areas. Lento has been used widely in kennels, stables, farms, land fills and any area where animals are kept on hard standing.

K41EP Lithium Grease is a premium quality multipurpose grease for use in anti-friction and plain bearings subjected to high shock load and vibration conditions used extensively for applications throughout industry and the automotive sector. 

K42EP Lithium Grease is a premium quality multipurpose grease for use in anti-friction and plain bearings subjected to high shock load and vibration conditions used extensively for applications throughout industry and the automotive sector. 

Click on image or Select a pack size below to see available pack options!

K43EP is a high quality NLGI 3 Lithium grease suitable for a wide range of plain and rolling bearings used within given temperature limits & is used extensively for applications throughout industry and the automotive sector.

K43EP is currently in British mainline applications as follows:

• Carriage wheel sets using Commonwealth, B4 and B5 passenger bogies.
• Class 37/47/50/56 locomotive axle bearings and suspension tubes on freight and passenger duties.

K43EP is also used extensively on Heritage Railway lines where a grease of this type is specified.

Click on image or Select a pack size below to see available pack options!