Industrial

K3 Calcium EP3 is a premium quality, water resistant grease for use in industrial and marine applications where the presence of water and humid atmospheres can effect lubricating performance.  It is recommended for use in water pumps, rolling mills, mines, quarries and marine equipment where salt or fresh water spray or ingress is unavoidable.
Also suitable for use as a CHUCK Grease.

Cora F is a high additive neat cutting oil recommended for a wide range of operations,

Lodexol ISO 100 Industrial Gear Oil

Lodexol PG 220, Synthetic Polyalkylene Glycol Industrial Gear Oil

Supercut 2000 an extreme pressure, micro-emulsion metal working fluid suitable for all

general machining operations on ferrous materials up to and including high carbon steels and
most stainless steels.

Supergrind MP is a fully synthetic water mix grinding fluid offering extended sump life.

Triad 46 is recommended for both Industrial and off highway hydraulic systems. Other applications include: machining centre headstocks, centralised lubrication systems, suspension units, tipping gear, jacks, PTOs, et cetera.

Milking Machine Vacuum Pump Oil is suitable for use in a variety of pumps designs operating in all temperatures and conditions. Also recommended for the lubrication of associated milk handling hydraulics and equipment.

The ARIA EP range are specifically designed for the lubrication of percussion type air tools, they have low pour points and special additives to protect against rust, corrosion and water washing. They have excellent anti-wear and EP properties, a vital antifogging agent to maintain a healthy working environment and an anti-foamant to facilitate the rapid release of air from the oil.

12 inch flexible hose to fit Side Lever Grease Gun, 101200

Workshop Pro White Spray Grease is a combination of a Calcium and Zinc based grease in an aerosol form offering good resistance to water and heat.

It has impeccable resistance to water and long lasting protection against corrosion

Workshop Pro Premium Hand Cleanser is suitable for use in all areas and types of industry. It cleans deep into the pores, providing lasting skin-protection and replacing the skins natural oils. Premium Hand Cleanser will remove a wide range of products from soiled skin including oils, greases, tar, bitumen and printing inks.

Lodexol FS 220 Fully Synthetic Industrial Gear Oil

Astraslide S 68 is recommended for all machine tool slideways, especially modern plastic and composite slideways, tables, carriages, guides, tool stations and other machine applications where an ISO VG 68 extreme pressure lubricant is specified.

Recommended for all industrial and commercial washrooms, including those in factories, workshops, construction sites, mines, quarries, farms and stables, where a powerful hand cleanser is required. Workshop Pro Citrus Hand Gel is a stable formulation, and does not dry out or separate, when properly dispensed. Workshop Pro Citrus Hand Gel does NOT contain environment polluting polyethylene microbeads.

Alto Machine Oils are a versatile range of oils that can be used wherever a straight mineral oil with modest additive treatment has been specified.

Ankor D is recommended for all short and medium term rust proofing. It is particularly suitable for use in machine shops as an inter operation rust preventative for wet parts. This product is also highly recommended for protecting bright steel wire, bars, billets, sections and sheets during storage and transport

The ARIA EP range are specifically designed for the lubrication of percussion type air tools, they have low pour points and special additives to protect against rust, corrosion and water washing. They have excellent anti-wear and EP properties, a vital antifogging agent to maintain a healthy working environment and an anti-foamant to facilitate the rapid release of air from the oil.

Workshop Pro Carb Cleaner removes stubborn lacquer and dirt from carburetors, fuel injection

systems and automatic chokes.

areas and inlet valve

Lodexol ISO 150 Industrial Gear Oil

Lodexol FS 320 Fully Synthetic Industrial Gear Oil

Lodexol PG 320 Polyalkylene Glycol Industrial Gear Oil

K15 is recommend for open gears, particularly those in exposed locations such as docks, harbours, waterways, railways, mines and construction sites. Also recommended for wire ropes and sheaves, chains, pulleys and exposed plain bearings.

Supercut 3000 is a micro-emulsion metalworking fluid that is readily miscible with most mains water producing a transparent blue emulsion that is suited to a wide variety of applications.

S-3403 is a special synthetic chain lubricant specifically designed for use in high temperatures and other adverse conditions where conventional lubricants would fail.

Recommended for all chain drives working in high temperatures and difficult conditions.
Particularly recommended for duplex or triplex roller chains and inverted tooth and compact
drives where cooling is a problem.

Astra 100 Slideway Oil has been replaced by Astra 150

Supergrind Plus is recommended for all grinding applications where a synthetic grinding fluid is desirable or recommended. It is particularly suited to those systems where foaming, fines separation and wheel glazing problems have been experienced with other formulae. Supergrind Plus is particularly suitable for achieving very fine surface finishes (micro inch finishes).

Tabor 95 Mould Release Oil is recommended as a concrete release agent for use with all steel and wooden moulds, especially those used for continuous production of slabs and paving.

Triad 68 Hydraulic Oil is recommended for both Industrial and off highway hydraulic systems. Other applications include: machining centre headstocks, centralised lubrication systems, suspension units, tipping gear, jacks, PTOs, et cetera

Samoa - Double handed grease gun c/w flexible outlet. Fits to our 500 gm screw in cartridges

Faracut HS3 is a highly refined cutting oil with special lubricity additives to enhance cutting without the use of Chlorine, Sulphur or Phosphorus.

151 100 High pressure grease pump suitable for12.5 to 18 kg kegs. Manual lever pump with 1.5 M hose, rigid stem & 4 Jaw connector.