Industrial

Alto Machine Oils are a versatile range of oils that can be used wherever a straight mineral oil with modest additive treatment has been specified. 

Ankor RR Is recommended for all general purpose de-watering applications where some

limited corrosion protection is required afterwards. It is also recommended as a general
purpose inter-operational corrosion protective and as a short to medium term corrosion
protective under indoor storage conditions. It is suitable for protection of all bright steel bars,
sheets and sections and for protection of non-ferrous alloys against oxidation.

Astra Slideway Lubricants have been specifically developed for the lubrication of machine tool slideways and tables.

Workshop Pro Semi-synthetic Chain Lubricant is a specially formulated aerosol designed for the protection of chains used in a variety of applications. It is recommended for use on motorcycle chains, lift & drive chains, leaf & roller chains, conveyor system chains, et cetera.

K25 has been specially formulated for use on fifth wheel plates. It can also be used for heavy duty applications in industrial equipment, trucks and construction plant such as bulldozers, scrapers, loading shovels and dump trucks where a graphited grease is recommended.

Lodexol FS 460 Fully Synthetic Industrial Gear Oil

Lodexol ISO VG 220 Industrial Gear Oil is a high quality mineral oil with extreme pressure (EP) additives, intended for use in industrial gear systems of the spur, helical and straight and spiral bevel types.

Marcia D is a multipurpose neat cutting oil containing extreme pressure and lubricity additives developed especially for use in medium to heavy duty applications on free cutting, medium tensile, certain stainless steels and many non-ferrous alloys.

Lodexol PG 460 polyalkylene glycol industrial gear oil

Supergrind SW is a fully synthetic water-mix grinding fluid that forms a true solution when diluted with water.

Supergrind SW is formulated to have a very low foaming tendency, even when used with soft water.

Supercut 4000 is a semi-synthetic, micro-emulsion metalworking fluid. It is readily miscible with most mains water to produce a translucent green emulsion that is suited to a wide variety of applications

Morris Lubricants Transformer Oil is an uninhibited,  highly refined naphthenic product for use solely in oil filled transformers and other electrical equipment. 
It is recommended for use as a dielectric and coolant in all oil filled transformers, switchgear, welders and other electrical equipment.

Terza M-107 is a high quality low viscosity mould release oil containing low odour hydrocarbon solvent, reactive fat and lubricity additives.
Recommended for use as a concrete mould release and for the protection of moulds. Particularly suitable for the continuous production of roof tiles and where a non-staining oil is essential.

Liquimatic VG5 is a low viscosity ashless hydraulic oil with anti-wear properties. 

It is ideal for lubricating high-speed zero clearance bearings on grinding machines and other
applications, where a low viscosity grade of this type is requested

Grease Filler pump for centralized greasing systems, 12 - 18 kg kegs

Lift action pump for the transfer of lubricants from our 25 litre metal drums.

* Does not fit our 20 litre antifreeze drums *

Alto Machine Oils are a versatile range of oils that can be used wherever a straight mineral oil with modest additive treatment has been specified.

Arcato R 68 Refrigeration Oil is recommended for use in all commonly found domestic, commercial, and industrial refrigeration and freezer systems, and all air conditioning systems (except in rare cases where a synthetic oil has been specified). They are compatible with commonly used HCFC, CFC and ammonia refrigerants.

Ankor ST is recommended as a short-term de-watering corrosion preventative for parts stored under
cover outdoors and as a short to medium term corrosion preventative for indoor use. It is also
particularly suitable for use as an inter-optional corrosion preventative for the de-watering and
protection of machined components prior to subsequent treatment. Ankor ST is recommended for the short to medium term protection of bright steel wire, bars, billets and sheet

Workshop Pro Fully-synthetic Chain Lubricant is a specially formulated aerosol designed for the protection of chains used in a variety of applications. It is recommended for use on motorcycle chains, lift & drive chains, leaf & roller chains, conveyor system chains, et cetera.

Liquimatic No 1 is a zinc free, ISO VG 10 Hydraulic Oil formulated with Group II base fluids incorporating ashless additive technology.

Lodexol ISO 320 Industrial Gear Oil

Marcia DE is a heavy duty neat cutting oil containing high levels of extreme pressure additives

K40EP is recommended for gears, plain and anti-friction bearings where an NLGI 0 is specified and for industrial and agricultural purposes where the use of a semi fluid or very soft product is essential or desirable.

Astra Slideway Lubricants have been specifically developed for the lubrication of machine tool slideways and tables.

Supergrind Ultra is a premium quality versatile fully synthetic clear grinding fluid

Supercut 6000 has been developed to supply the modern machine workshop with a single versatile product to cope with a wide range of machining operations.

Terza 7060 is a high quality low viscosity mould release oil containing solvent refined mineral oil,

hydrocarbon solvent and lubricity additives.

A general purpose disinfectant with powerful sanitising action and pleasant lavender odour. Formulated to QAP 50 standard. Suitable for use on floors, walls, drains and in toilet areas. Lento has been used widely in kennels, stables, farms, land fills and any area where animals are kept on hard standing.

K41EP Lithium Grease is a premium quality multipurpose grease for use in anti-friction and plain bearings subjected to high shock load and vibration conditions used extensively for applications throughout industry and the automotive sector. 

K42EP Lithium Grease is a premium quality multipurpose grease for use in anti-friction and plain bearings subjected to high shock load and vibration conditions used extensively for applications throughout industry and the automotive sector. 

Click on image or Select a pack size below to see available pack options!

K43EP is a high quality NLGI 3 Lithium grease suitable for a wide range of plain and rolling bearings used within given temperature limits & is used extensively for applications throughout industry and the automotive sector.

K43EP is currently in British mainline applications as follows:

• Carriage wheel sets using Commonwealth, B4 and B5 passenger bogies.
• Class 37/47/50/56 locomotive axle bearings and suspension tubes on freight and passenger duties.

K43EP is also used extensively on Heritage Railway lines where a grease of this type is specified.

Click on image or Select a pack size below to see available pack options!

Steel Pump with manual lever action to suit 205 litre steel drums.

Alto Machine Oils are a versatile range of oils that can be used wherever a straight mineral oil with modest additive treatment has been specified. 

Ankorsol can be used on its own as a corrosion preventative for water systems (typical
treatment rate of 3%) or as a supplement for antifreeze (typical treatment rate 2%). It is
particularly useful in vehicle cooling systems where a high level of freezing protection is not
required, enabling antifreeze to be used at a reduced concentration whilst maintaining a high
level of corrosion protection.

Air Force 2000 ISOVG 68 Compressor Oil

Workshop  Pro Traffic Film Remover is  a unique combination of surface active agents, sequestrants and alkaline builders that can be used for car & lorry cleaning by brush wash or automatic brush wash. It can also be used in the cleaning of light and heavy soils from the likes of concrete floors, metal surfaces and driveways (except Tarmacadam).  It may also find use in the removal of temporary corrosion inhibitors from metal surfaces. Dilutions for these applications are to be determined on an individual basis, based on the degree of soiling, method of application et cetera.

Liquimatic No 2 is a zinc free, Ashless additive, ISO VG 15 Hydraulic Oil formulated from Group II base fluids.

Lodexol ISO 460 Industrial Gear Oil

Marcia F has been developed as a low viscosity, extreme pressure neat oil, suited to a wide variety of applications, particularly involving ferrous alloys

Workshop Pro Solvent Degreaser is a ready for use, pink coloured emulsifiable fluid, manufactured
from a highly refined hydrocarbon solvent and a non-ionic surfactant.

Magnesium alloys without fears of corrosion or corrosive residues on the surface.

Air Force 2000 ISOVG 150 Compressor Oil

Alto Machine Oils are a versatile range of oils that can be used wherever a straight mineral oil with modest additive treatment has been specified. 

Lodexol ISO 680 Industrial Gear Oil

Liquimatic No 3 is a zinc free, Ashless additive, ISO VG 22 Hydraulic Oil formulated from Group II base fluids.

Lydian Degreaser is a ready for use, blue coloured emulsifiable fluid, manufactured from a
mixture of hydrocarbon solvents and a non-ionic detergent.

Recommended for removal of oil grease and dirt from metal, paintwork and concrete.

Marcia H is a specialist honing oil containing extreme pressure and lubricity additives

Workshop Pro Surface Conditioner is a special blend of silicone, solvents and cleaners. It has been

designed as a multipurpose product that cleans, restores and protects surfaces at the same time. 

It is easy to use and gives a like new finish to all kinds of surfaces including vinyl, plastic, wood, chrome & stainless steel

Supercut 8000 is a highly sophisticated, semi-synthetic, micro emulsion specially designed for heavy duty machining applications in moderate to hard diluent waters. It will deliver stain free performance on steels, brasses and aerospace grade aluminium alloys

For dispensing high viscosity lubricants such as gear oils. Includes a medium pressure lever action pump (100 cc delivery per stroke) with a 1.5 m rubber hose with shut off valve and angled nozzle. 16 litre capacity container with oval shape with carrying handle and large opening for filling.

K48 is specially formulated for use in industrial equipment, cars, vans, trucks and construction plant such as bulldozers, scrapers, loading shovels and dump trucks where it will give superior performance, in all industrial plain and rolling element bearing.

Click on image or Select a pack size below to see available pack options!

Air Force 4000 ISO VG 32 is a 4000 Hour Rotary Screw Compressor Oil that complies with DIN 51506 VDL & ISO 6743-3: DAG

Alto Machine Oils are a versatile range of oils that can be used wherever a straight mineral oil with modest additive treatment has been specified. 

Liquimatic No 4 is a zinc free, Ashless additive, ISO VG 32 Hydraulic Oil formulated from Group II base fluids.

Workshop Pro Anti-Seize is a lead and CFC free compound, made from solvent refined oil, Bentonite thickener and fine copper powder. The product is highly recommended as a thread lubricant on the external parts of all racing motorcycles, where rapid and trouble free disassembly by pit crews is a competitive essential.

Supercut G is a highly sophisticated semi-synthetic micro-emulsion cutting fluid incorporating the latest in performance additive technology, developed specifically for use with the more difficult to machine alloys & aluminium. It is an excellent product for workshop rationalisation and is particularly suited to modern CNC machining centres.

Marcia T is a heavy duty neat cutting oil containing high levels of extreme pressure and lubricity additives 

K62 is a premium quality, Bentonite thickened, non-melting grease for use in plain and anti-friction bearings subjected to elevated temperatures.

K62 is recommended for use in all industrial ball, roller and plain bearings where extremely
high temperatures are coupled with heavy loads. K62 can be used at temperatures from –20 to

160°C.

Air Force 4000 ISO VG 46 Compressor Oil

Alto Machine Oils are a versatile range of oils that can be used wherever a straight mineral oil with modest additive treatment has been specified. Alto 460, 680 and 1000 can also be used as steam cylinder oils when condensate recovery is required.

Supersaw is a micro-emulsion, biocide protected, water soluble cutting fluid. It forms a very stable emulsion, even with hard water, and incorporates extreme pressure additives for enhanced cutting performance.

Liquimatic No 5 is a zinc free, Ashless additive, ISO VG 46 Hydraulic Oil formulated from Group II base fluids.

Workshop Pro Solvent Cleaner is a powerful residue-free solvent degreaser and brake cleaner.

A complex mixture of hydrocarbon and oxygenated solvents designed to clean and degrease all flat and irregular surfaces & is free from chlorinated and other ozone depleting solvents

K65 Synthetic High Temperature Grease is recommended for kiln car bearings, furnace doors, drying tunnel mechanisms and other applications where high temperatures are encountered.