MULTIPURPOSE HYDROCARBON FLUID
Tabor OK is a low odour, relatively high flash point kerosine that finds use in a variety of applications e.g. as a process oil, degreasing medium and as a dielectric fluid for spark erosion. It is also suitable as a replacement for chlorinated solvents in certain applications and may be used as a lower odour, high flash point alternative to white spirit where the evaporation rate is not critical.
Tabor OK is primarily used as a degreasant to remove general dirt, temporary rustpreventatives, grease and oil prior to performing operations such as painting or other treatments and is an ideal solvent for parts washers.
It may also be used as a dielectric fluid for spark erosion machines and for pressing, spinning and reaming of aluminium alloys and some free cutting bronzes.
As a mould release agent for simple steel shuttering using wet concrete, Tabor OK will give good release and anti-corrosion properties.
NOTE: It should be remembered that when replacing chlorinated solvents with Tabor OK, that whilst it is not classed as being a flammable liquid, it will support combustion.
See Technical Data Sheet
- 25 litre
- Degrease Fluid
- Dielectric Fluid
- Mould Release Oil
- Spark Erosion Fluid