Classic & Steam

Ankor D is a special solvent deposited, short to medium term rust preventative.

Morris MEG Antifreeze is suitable for most engine cooling systems found in cars, vans, trucks, agricultural equipment and contractor’s plant. Exceeds the requirments of many European and International Standards including: ASTM D3306, SAE J 1034, BS 6580 (2010).

Workshop  Pro Traffic Film Remover is  a unique combination of surface active agents, sequestrants and alkaline builders that can be used for car & lorry cleaning by brush wash or automatic brush wash. It can also be used in the cleaning of light and heavy soils from the likes of concrete floors, metal surfaces and driveways (except Tarmacadam).  It may also find use in the removal of temporary corrosion inhibitors from metal surfaces. Dilutions for these applications are to be determined on an individual basis, based on the degree of soiling, method of application et cetera. 

Compound Steam Cylinder Oil T

Golden Film SAE 20 Classic Motor Oil

Sovereign Straight Steam Cylinder Oils are refined to give film strength at very high temperatures, providing excellent lubrication where needed to protect bores and valves. 

K6 is a premium quality, water resistant grease. It is recommended for the lubrication and protection of brake backing plates and plunger housings. It can also be used as a general industrial grease in wet and humid atmospheres.

Superclean Zero Lead 2005 lead replacement additive.

A general purpose disinfectant with powerful sanitising action and pleasant lavender odour. Formulated to QAP 50 standard. Suitable for use on floors, walls, drains and in toilet areas. Lento has been used widely in kennels, stables, farms, land fills and any area where animals are kept on herd standing.

Workshop Pro Fully Synthetic Chain Lubricant is a specially formulated aerosol designed for the protection of chains used in a variety of applications.

Compound steam 1000 has been specifically formulated for use in non-condensing models and with the co-operation of Stanley Steam Car owners. This advanced formulation not only ensures the correct lubrication of cylinders but also good visibility in the ‘Winker’. This product can be used in all steam engines working up to pressures in excess of 250lbs per square inch, with either saturated or superheated steam. Meets the specification requirements of British Rail schedule number MT276.

Alto Machine Oils are a versatile range of oils that can be used wherever a straight mineral oil with modest additive treatment has been specified. Alto 460, 680 and 1000 can also be used as steam cylinder oils when condensate recovery is required.

Ankor RR Preservative Oil

Golden Film SAE 30 Classic Motor Oil

Lydian Degreaser is a ready for use, blue coloured emulsifiable fluid.

Developed specifically for steam engines operating on the national rail network where true superheat conditions are experienced on long hauls