Speciality Products

Workshop Pro Premium Hand Cleanser is suitable for use in all areas and types of industry. It cleans deep into the pores, providing lasting skin-protection and replacing the skins natural oils. Premium Hand Cleanser will remove a wide range of products from soiled skin including oils, greases, tar, bitumen and printing inks.

Workshop Pro Premium Barrier Cream prevents noxious substances coming into contact with the skin and stops soiling from penetrating deep into the skin, as well as reducing skin irritation and minimising allergy and sensitivity potential.

Recommended for all industrial and commercial washrooms, including those in factories, workshops, construction sites, mines, quarries, farms and stables, where a powerful hand cleanser is required. Workshop Pro Citrus Hand Gel is a stable formulation, and does not dry out or separate, when properly dispensed. Workshop Pro Citrus Hand Gel does NOT contain environment polluting polyethylene microbeads.

Ankorsol can be used on its own as a corrosion preventative for water systems (typical
treatment rate of 3%) or as a supplement for antifreeze (typical treatment rate 2%). It is
particularly useful in vehicle cooling systems where a high level of freezing protection is not
required, enabling antifreeze to be used at a reduced concentration whilst maintaining a high
level of corrosion protection.

LHM Plus mineral based fluid is designed for use in the hydraulic systems of Citröen cars (see warning). LHM Plus is also suitable for top-up and re-fill of brake systems, power steering systems and self-levelling suspension systems where a mineral oil based product of this type has been specified

Ankor C is recommended for medium term rust proofing, for parts stored in or outdoors. It is suitable for use in machine shops as an inter operation rust preventative for wet parts, and where medium term external rust prevention is required. This product is also recommended for medium term protection of bright steel wire, bars, billets, sections and sheets.

Morris Brake Fluid is made from high molecular weight polyalkylene glycol ethers and polyalkylene glycol ether borates, to give a high boiling point fluid of DOT 4 quality

Workshop PRO All Seasons Screen Wash is a specially formulated screen wash concentrate that is made for adding to water in vehicle washer bottles.

Ankor D is recommended for all short and medium term rust proofing. It is particularly suitable for use in machine shops as an inter operation rust preventative for wet parts. This product is also highly recommended for protecting bright steel wire, bars, billets, sections and sheets during storage and transport

Morris MEG Antifreeze is suitable for most engine cooling systems found in cars, vans, trucks, agricultural equipment and contractor’s plant. Exceeds the requirments of many European and International Standards including: ASTM D3306, SAE J 1034, BS 6580 (2010).

Workshop  Pro Traffic Film Remover is  a unique combination of surface active agents, sequestrants and alkaline builders that can be used for car & lorry cleaning by brush wash or automatic brush wash. It can also be used in the cleaning of light and heavy soils from the likes of concrete floors, metal surfaces and driveways (except Tarmacadam).  It may also find use in the removal of temporary corrosion inhibitors from metal surfaces. Dilutions for these applications are to be determined on an individual basis, based on the degree of soiling, method of application et cetera.

A general purpose disinfectant with powerful sanitising action and pleasant lavender odour. Formulated to QAP 50 standard. Suitable for use on floors, walls, drains and in toilet areas. Lento has been used widely in kennels, stables, farms, land fills and any area where animals are kept on hard standing.

Ankor RR Is recommended for all general purpose de-watering applications where some

limited corrosion protection is required afterwards. It is also recommended as a general
purpose inter-operational corrosion protective and as a short to medium term corrosion
protective under indoor storage conditions. It is suitable for protection of all bright steel bars,
sheets and sections and for protection of non-ferrous alloys against oxidation.

Lydian Degreaser is a ready for use, blue coloured emulsifiable fluid, manufactured from a
mixture of hydrocarbon solvents and a non-ionic detergent.

Recommended for removal of oil grease and dirt from metal, paintwork and concrete.

Ankor ST is recommended as a short-term de-watering corrosion preventative for parts stored under
cover outdoors and as a short to medium term corrosion preventative for indoor use. It is also
particularly suitable for use as an inter-optional corrosion preventative for the de-watering and
protection of machined components prior to subsequent treatment. Ankor ST is recommended for the short to medium term protection of bright steel wire, bars, billets and sheet

Ankor Wax is recommended for medium and long term corrosion protection applications. This product is highly recommended for protecting bright steel wire, bars, billets, sections and sheets during long term storage and transport. It many also be used as an underbody protective