Industrial

Steel Pump with manual lever action to suit 205 litre steel drums.

Alto Machine Oils are a versatile range of oils that can be used wherever a straight mineral oil with modest additive treatment has been specified. 

Ankorsol can be used on its own as a corrosion preventative for water systems (typical
treatment rate of 3%) or as a supplement for antifreeze (typical treatment rate 2%). It is
particularly useful in vehicle cooling systems where a high level of freezing protection is not
required, enabling antifreeze to be used at a reduced concentration whilst maintaining a high
level of corrosion protection.

Air Force 2000 ISOVG 68 Compressor Oil

Workshop  Pro Traffic Film Remover is  a unique combination of surface active agents, sequestrants and alkaline builders that can be used for car & lorry cleaning by brush wash or automatic brush wash. It can also be used in the cleaning of light and heavy soils from the likes of concrete floors, metal surfaces and driveways (except Tarmacadam).  It may also find use in the removal of temporary corrosion inhibitors from metal surfaces. Dilutions for these applications are to be determined on an individual basis, based on the degree of soiling, method of application et cetera.

Liquimatic No 2 is a zinc free, Ashless additive, ISO VG 15 Hydraulic Oil formulated from Group II base fluids.

Lodexol ISO 460 Industrial Gear Oil

Marcia F has been developed as a low viscosity, extreme pressure neat oil, suited to a wide variety of applications, particularly involving ferrous alloys

Workshop Pro Solvent Degreaser is a ready for use, pink coloured emulsifiable fluid, manufactured
from a highly refined hydrocarbon solvent and a non-ionic surfactant.

Magnesium alloys without fears of corrosion or corrosive residues on the surface.

Air Force 2000 ISOVG 150 Compressor Oil

Alto Machine Oils are a versatile range of oils that can be used wherever a straight mineral oil with modest additive treatment has been specified. 

Lodexol ISO 680 Industrial Gear Oil

Liquimatic No 3 is a zinc free, Ashless additive, ISO VG 22 Hydraulic Oil formulated from Group II base fluids.

Lydian Degreaser is a ready for use, blue coloured emulsifiable fluid, manufactured from a
mixture of hydrocarbon solvents and a non-ionic detergent.

Recommended for removal of oil grease and dirt from metal, paintwork and concrete.

Marcia H is a specialist honing oil containing extreme pressure and lubricity additives

Workshop Pro Surface Conditioner is a special blend of silicone, solvents and cleaners. It has been

designed as a multipurpose product that cleans, restores and protects surfaces at the same time. 

It is easy to use and gives a like new finish to all kinds of surfaces including vinyl, plastic, wood, chrome & stainless steel

Supercut 8000 is a highly sophisticated, semi-synthetic, micro emulsion specially designed for heavy duty machining applications in moderate to hard diluent waters. It will deliver stain free performance on steels, brasses and aerospace grade aluminium alloys

For dispensing high viscosity lubricants such as gear oils. Includes a medium pressure lever action pump (100 cc delivery per stroke) with a 1.5 m rubber hose with shut off valve and angled nozzle. 16 litre capacity container with oval shape with carrying handle and large opening for filling.

K48 is specially formulated for use in industrial equipment, cars, vans, trucks and construction plant such as bulldozers, scrapers, loading shovels and dump trucks where it will give superior performance, in all industrial plain and rolling element bearing.

Click on image or Select a pack size below to see available pack options!

Air Force 4000 ISO VG 32 is a 4000 Hour Rotary Screw Compressor Oil that complies with DIN 51506 VDL & ISO 6743-3: DAG

Alto Machine Oils are a versatile range of oils that can be used wherever a straight mineral oil with modest additive treatment has been specified. 

Liquimatic No 4 is a zinc free, Ashless additive, ISO VG 32 Hydraulic Oil formulated from Group II base fluids.

Workshop Pro Anti-Seize is a lead and CFC free compound, made from solvent refined oil, Bentonite thickener and fine copper powder. The product is highly recommended as a thread lubricant on the external parts of all racing motorcycles, where rapid and trouble free disassembly by pit crews is a competitive essential.

Supercut G is a highly sophisticated semi-synthetic micro-emulsion cutting fluid incorporating the latest in performance additive technology, developed specifically for use with the more difficult to machine alloys & aluminium. It is an excellent product for workshop rationalisation and is particularly suited to modern CNC machining centres.

Marcia T is a heavy duty neat cutting oil containing high levels of extreme pressure and lubricity additives 

K62 is a premium quality, Bentonite thickened, non-melting grease for use in plain and anti-friction bearings subjected to elevated temperatures.

K62 is recommended for use in all industrial ball, roller and plain bearings where extremely
high temperatures are coupled with heavy loads. K62 can be used at temperatures from –20 to

160°C.

Air Force 4000 ISO VG 46 Compressor Oil

Alto Machine Oils are a versatile range of oils that can be used wherever a straight mineral oil with modest additive treatment has been specified. Alto 460, 680 and 1000 can also be used as steam cylinder oils when condensate recovery is required.

Supersaw is a micro-emulsion, biocide protected, water soluble cutting fluid. It forms a very stable emulsion, even with hard water, and incorporates extreme pressure additives for enhanced cutting performance.

Liquimatic No 5 is a zinc free, Ashless additive, ISO VG 46 Hydraulic Oil formulated from Group II base fluids.

Workshop Pro Solvent Cleaner is a powerful residue-free solvent degreaser and brake cleaner.

A complex mixture of hydrocarbon and oxygenated solvents designed to clean and degrease all flat and irregular surfaces & is free from chlorinated and other ozone depleting solvents

K65 Synthetic High Temperature Grease is recommended for kiln car bearings, furnace doors, drying tunnel mechanisms and other applications where high temperatures are encountered.
 

A low viscosity, thermally stable, ester based lubricant for use on aluminium ingot and bar for sawing applications.

The product may be applied by air mist lubricator or by flood application.

Sulto PX30 is a low odour, light coloured chlorine free, neat cutting fluid suitable for use on both ferrous and non-ferrous alloys

Air Force 4000 ISO VG 68 Compressor Oil

Alto Machine Oils are a versatile range of oils that can be used wherever a straight mineral oil with modest additive treatment has been specified. Alto 460, 680 and 1000 can also be used as steam cylinder oils when condensate recovery is required.

Liquimatic No 6 is a zinc free, Ashless additive, ISO VG 68 Hydraulic Oil formulated from Group II base fluids.

K76 acts as an excellent lubricant between rubber components and steel or other metals. Due to the vegetable base oil the grease is resistant to hydrocarbon solvents, e.g. petrol and diesel.

Click on image or Select a pack size below to see available pack options!

Air Force 4000 ISO VG 100 Compressor Oil

Alto Machine Oils are a versatile range of oils that can be used wherever a straight mineral oil with modest additive treatment has been specified. Alto 460, 680 and 1000 can also be used as steam cylinder oils when condensate recovery is required.

Liquimatic No 7 is a zinc free, Ashless additive, ISO VG 100 Hydraulic Oil formulated from Group II base fluids.

K90 Calcium Sulphonate Complex Grease has been developed as a high performance grease for construction plant such as bulldozers, scrapers, loading shovels and dump trucks where it will give outstanding performance.
It is also recommended for use in industrial equipment operating at high temperatures or exposed to salt water.

Click on image or Select a pack size below to see available pack options!

Morris K92 Hammer Grease is a specially developed grease using a semi-synthetic blend of base oils manufactured with a bentone thickener containing a high level of graphite and synergistic EP-additives and antioxidants designed particularly for hydraulic hammer lubrication, pin and bush type of applications on large earth moving and general off-road heavy plant machinery.

Airforce 8000 VG32 is part of a range of ester based, fully synthetic, compressor lubricants designed to meet the requirements of a variety of compressor types, including reciprocating, rotary vane and rotary screw designs. They incorporate the latest additive technology and have proved to be far superior in performance to conventional oils under all conditions.

K99 is a premium quality, water resistant grease for use in industrial and marine applications

Click on image or Select a pack size below to see available pack options!

Liquimatic No 8 is a zinc free, Ashless additive, ISO VG 150 Hydraulic Oil formulated from Group II base fluids.

Airforce 8000 VG46 is part of a range of ester based, fully synthetic, compressor lubricants designed to meet the requirements of a variety of compressor types, including reciprocating, rotary vane and rotary screw designs. They incorporate the latest additive technology and have proved to be far superior in performance to conventional oils under all conditions.

K323 Premium Blue Grease is an extremely sophisticated lithium/calcium base grease which incorporates modern polymer technology.

K323 is recommended for automotive, agricultural, industrial and marine applications where
such items as high loads, water wash out and abrasive wear have been a recognised problem.