Golden Film SAE 20W-50 Classic Motor Oil is specialist high quality, low detergent/dispersant multigrade lubricant. This oil is suitable for use in naturally aspirated four stroke petrol and diesel engines.
K41EP General Purpose Lithium Grease
Ring Free XHD mono-grades are high quality engine oils that may also be used in transmissions and hydraulic systems, depending upon equipment requirements.
Recommended for the front forks and rear suspension units on all motorcycles used in arduous competition and off road activities. For normal road use the viscosity grade recommended in the manufacturer’s handbook should be adhered to. Suspension Grades are available in four viscosity grades 5, 10, 15 & 20wt.
Ankor Wax is recommended for medium and long term corrosion protection applications. This product is highly recommended for protecting bright steel wire, bars, billets, sections and sheets during long term storage and transport. It many also be used as an underbody protective
Multivis ECO FB 5W-20 has been specifically developed for use in Ford’s latest fuel efficient petrol engines
Race ATV 10W-40 is recommended for use in all-terrain vehicles, quad bikes, generator sets and other
ancillary equipment, where a product of this type and viscosity grade is specified.
Workshop Pro Fully Synthetic Chain Lubricant is a specially formulated aerosol designed for the protection of chains used in a variety of applications.
Golden Film SAE 30 Classic Motor Oil
K42EP Lithium EP 2 Muti-purpose Grease
Recommended for use in all Ford automatic transmissions where a M2C 33G qualified product has been specified. Other transmission applications include Borg Warner, ITL (JCB) and certain Land Rover units. It is also recommended for use in fluid drives, torque converters, power steering units and hydraulic systems when an oil of this specification is required.
Liquimatic DS is an advanced synthetic based automotive transmission fluid that offers increased cold start efficiency resulting in improved fuel economy.
Liquimatic DX14 is an advanced automatic transmission fluid, primarily developed for use in Mercedes Benz 7-speed RWD (Rear Wheel Drive) automatic gearboxes and all AMG models. The product ensures efficient and effective gearshift under a variety of loads and operating conditions.
Golden Film SAE 40 Classic Motor Oil
K43EP is a high quality NLGI 3 Lithium grease suitable for a wide range of plain and rolling bearings used within given temperature limits & is used extensively for applications throughout industry and the automotive sector.
K43EP is currently in British mainline applications as follows:
• Carriage wheel sets using Commonwealth, B4 and B5 passenger bogies. • Class 37/47/50/56 locomotive axle bearings and suspension tubes on freight and passenger duties.
K43EP is also used extensively on Heritage Railway lines where a grease of this type is specified.
Workshop Pro White Spray Grease is a combination of a Calcium and Zinc based grease in an aerosol form offering good resistance to water and heat.
Multivis ADT C1 5W-30 is a low-SAPS, synthetic technology engine oil formulated to meet the demands and fuel efficiency expectations of the latest petrol and diesel engines, where a low viscosity oil is required.
Ultralife 1 is suitable for the cooling systems of modern engines in passenger car, trucks, agricultural and contractors plant, where an OAT antifreeze of this specification is demanded.
Golden Film SAE 50 Classic Motor Oil
K48 Moly - Grease
Golden Film Classic Motorsport SAE 15W-50 is manufactured from high quality mineral oils and an advanced additive system and is designed primarily for petrol engines, but may also be used in older diesel units.
Workshop Pro Surface Conditioner is a special blend of silicone, solvents and cleaners.
Multivis ADT C2 5W-30 is a mid-SAPS (Sulphur, Ash, Phosphorus) synthetic based multigrade engine oil
Ultralife 2 may be used with confidence in engines manufactured from cast iron, aluminium orcombinations of the two metals, and in cooling systems made of aluminium or copper alloys. It isparticularly recommended for use in Asian OEM’s, in line with their basic chemistryrequirements.