Construction & Plant

XEP 80w-90 is a mineral oil based gear oil, that has been formulated with a high level of extreme pressure (EP) additives and friction modifiers to protect the critical mechanisms of limited slip differentials.

Workshop  Pro Traffic Film Remover is  a unique combination of surface active agents, sequestrants and alkaline builders that can be used for car & lorry cleaning by brush wash or automatic brush wash. It can also be used in the cleaning of light and heavy soils from the likes of concrete floors, metal surfaces and driveways (except Tarmacadam).  It may also find use in the removal of temporary corrosion inhibitors from metal surfaces. Dilutions for these applications are to be determined on an individual basis, based on the degree of soiling, method of application et cetera. 

Workshop Pro Surface Conditioner is a special blend of silicone, solvents and cleaners. 

Workshop Pro Solvent Degreaser is a ready for use, pink coloured emulsifiable fluid, manufactured from a highly refined hydrocarbon solvent and a non-ionic surfactant.

Solvent Cleaner Aerosol. A complex mixture of hydrocarbon and oxygenated solvents designed to clean and degrease all flat and irregular surfaces.

Workshop Pro Semi-synthetic Chain Lubricant is a specially formulated aerosol designed for the protection of chains used in a variety of applications.

MD-4 is an effective, damp start and penetrating fluid with outstanding corrosion protection properties.

Workshop Pro Fully Synthetic Chain Lubricant is a specially formulated aerosol designed for the protection of chains used in a variety of applications.

A powerful heavy-duty hand cleanser containing environment friendly micro-particles for the effective removal of ingrained dirt, grease and grime. Free from petroleum derived solvents but designed to outperform traditional solvent based hand cleansers.

A selected treatment designed to remove dirt, grime and accumulated oily deposits from carburettors and fuel injection systems.

Workshop PRO Anti-Seize is a lead and CFC free compound, made from solvent refined oil, Bentonite thickener and fine copper powder.

Workshop PRO All Seasons Screen Wash is a specially formulated screen wash concentrate that is made for adding to water in vehicle washer bottles.

Versimax HD8 10W-40 is a low SAPS (Sulphated Ash, Phosphorus and Sulphur) synthetic heavy duty diesel specific engine oil.

Versimax® HD5 10W-40 is a synthetic based high performance diesel engine oil, utilizing performance additive technology to meet API CI-4 and ACEA E7.

Versimax HD4 15W-40 has been formulated to provide reliable and robust performance in a wide variety of engine types used in a range of applications

Versimax HD3 20W-50 is suitable for use in diesel engines used in commercial vehicles, buses, coaches, vans, off-highway and agricultural equipment. The versatility of this product also allows its use in petrol engines fitted in light commercial vehicles and passenger cars, where any of the performance levels shown below are specified.

Morris Lubricants Versimax® HD16 5W-30 is designed for use in Euro 5 / Euro 6, Interim Tier 4 / Stage 3B / Tier 4 and Stage 4 diesel engines, where any of the performance levels shown below are specified. Market sectors include: commercial vehicles, coaches, buses, off-highway and agricultural equipment, etc.

Versimax HD14 10W-30 has been developed for use in diesel engines fitted with exhaust gas re-circulation (EGR), selective catalytic reduction (SCR – Adblue) NOx reduction systems, diesel oxidation catalysts (DOC) and diesel particulate filters (DPF). Versimax HD14 10W-30 has been designed to cope with increased levels of bio-fuel and their effect in the engine.

Versimax HD12 15W-40 is a mid-SAPS heavy duty diesel engine oil, manufactured from Group II base fluids. This product contains an advanced additive package formulated to provide the utmost protection when operating in very severe conditions with extended drain intervals.

Versimax HD11 5W-30 is a top tier heavy duty diesel specific engine oil that has been designed to meet the necessary chemical limits required to maintain the efficiency of exhaust aftertreatment devices, including: DPF’s (diesel particulate filters), SCR (Adblue) / EGR NOX reduction systems, diesel oxidation catalysts (DOCs) and Adblue Slip-Catalysts.

Antifreeze Ultra Life Red 5 Year Protection

Ultralife 4 Long Life OAT Antifreeze may be used with confidence in engines manufactured from cast iron, aluminium or combinations of the two metals, and in cooling systems made of aluminium or copper alloys.

Morris Ultralife 3 can be used in internal combustion engines (ICEs), hybrids and the indirect cooling

systems of battery electric vehicles (BEVs) where any of the specifications listed are
demanded by the equipment manufacturer.  

Ultralife 2 may be used with confidence in engines manufactured from cast iron, aluminium or
combinations of the two metals, and in cooling systems made of aluminium or copper alloys. It is
particularly recommended for use in Asian OEM’s, in line with their basic chemistry
requirements.  

Ultralife 1 is suitable for the cooling systems of modern engines in passenger car, trucks, agricultural and contractors plant, where an OAT antifreeze of this specification is demanded.

Triad 68 Hydraulic Oil is recommended for both Industrial and off highway hydraulic systems. Other applications include: machining centre headstocks, centralised lubrication systems, suspension units, tipping gear, jacks, PTOs, et cetera

Triad 46 is recommended for both Industrial and off highway hydraulic systems. Other applications include: machining centre headstocks, centralised lubrication systems, suspension units, tipping gear, jacks, PTOs, et cetera.

Triad 32 is recommended for both Industrial and off highway hydraulic systems. Other applications include: machining centre headstocks, centralised lubrication systems, suspension units, tipping gear, jacks, PTOs, et cetera.