XEP 80w-90 is a mineral oil based gear oil, that has been formulated with a high level of extreme pressure (EP) additives and friction modifiers to protect the critical mechanisms of limited slip differentials.
Workshop Pro White Spray Grease is a combination of a Calcium and Zinc based grease in an aerosol form offering good resistance to water and heat.
Workshop Pro Traffic Film Remover is a unique combination of surface active agents, sequestrants and alkaline builders that can be used for car & lorry cleaning by brush wash or automatic brush wash. It can also be used in the cleaning of light and heavy soils from the likes of concrete floors, metal surfaces and driveways (except Tarmacadam). It may also find use in the removal of temporary corrosion inhibitors from metal surfaces. Dilutions for these applications are to be determined on an individual basis, based on the degree of soiling, method of application et cetera.
Workshop Pro Surface Conditioner is a special blend of silicone, solvents and cleaners.
Workshop Pro Solvent Degreaser is a ready for use, pink coloured emulsifiable fluid, manufactured from a highly refined hydrocarbon solvent and a non-ionic surfactant.
Solvent Cleaner Aerosol. A complex mixture of hydrocarbon and oxygenated solvents designed to clean and degrease all flat and irregular surfaces.
Workshop Pro Semi-synthetic Chain Lubricant is a specially formulated aerosol designed for the protection of chains used in a variety of applications.
MD-4 is an effective, damp start and penetrating fluid with outstanding corrosion protection properties.
Workshop Pro Fully Synthetic Chain Lubricant is a specially formulated aerosol designed for the protection of chains used in a variety of applications.
A powerful heavy-duty hand cleanser containing environment friendly micro-particles for the effective removal of ingrained dirt, grease and grime. Free from petroleum derived solvents but designed to outperform traditional solvent based hand cleansers.
A selected treatment designed to remove dirt, grime and accumulated oily deposits from carburettors and fuel injection systems.
Workshop PRO Anti-Seize is a lead and CFC free compound, made from solvent refined oil, Bentonite thickener and fine copper powder.
Workshop PRO All Seasons Screen Wash is a specially formulated screen wash concentrate that is made for adding to water in vehicle washer bottles.
Versimax HD8 10W-40 is a low SAPS (Sulphated Ash, Phosphorus and Sulphur) synthetic heavy duty diesel specific engine oil.
Versimax® HD5 10W-40 is a synthetic based high performance diesel engine oil, utilizing performance additive technology to meet API CI-4 and ACEA E7.
Versimax HD4 15W-40 has been formulated to provide reliable and robust performance in a wide variety of engine types used in a range of applications
Versimax HD3 20W-50 is suitable for use in diesel engines used in commercial vehicles, buses, coaches, vans, off-highway and agricultural equipment. The versatility of this product also allows its use in petrol engines fitted in light commercial vehicles and passenger cars, where any of the performance levels shown below are specified.
Versimax® HD18 5W-20 is designed for use in Euro 6 compliant diesel engines capable of using low viscosity fuel efficient lubricants where any of the following performance levels are specified. Scania LDF-5, MAN M3977.
Versimax HD17 5W-30 is designed for use in diesel engines meeting Euro IV, V and VI emission requirements where an oil of this quality is specified.
Morris Lubricants Versimax® HD16 5W-30 is designed for use in Euro 5 / Euro 6, Interim Tier 4 / Stage 3B / Tier 4 and Stage 4 diesel engines, where any of the performance levels shown below are specified. Market sectors include: commercial vehicles, coaches, buses, off-highway and agricultural equipment, etc.
Versimax HD14 10W-30 has been developed for use in diesel engines fitted with exhaust gas re-circulation (EGR), selective catalytic reduction (SCR – Adblue) NOx reduction systems, diesel oxidation catalysts (DOC) and diesel particulate filters (DPF). Versimax HD14 10W-30 has been designed to cope with increased levels of bio-fuel and their effect in the engine.
Versimax HD12 15W-40 is a mid-SAPS heavy duty diesel engine oil, manufactured from Group II base fluids. This product contains an advanced additive package formulated to provide the utmost protection when operating in very severe conditions with extended drain intervals.
Versimax HD11 5W-30 is a top tier heavy duty diesel specific engine oil that has been designed to meet the necessary chemical limits required to maintain the efficiency of exhaust aftertreatment devices, including: DPF’s (diesel particulate filters), SCR (Adblue) / EGR NOX reduction systems, diesel oxidation catalysts (DOCs) and Adblue Slip-Catalysts.
Antifreeze Ultra Life Red 5 Year Protection
Ultralife 4 Long Life OAT Antifreeze may be used with confidence in engines manufactured from cast iron, aluminium or combinations of the two metals, and in cooling systems made of aluminium or copper alloys.
Morris Ultralife 3 can be used in internal combustion engines (ICEs), hybrids and the indirect cooling
systems of battery electric vehicles (BEVs) where any of the specifications listed aredemanded by the equipment manufacturer.
Ultralife 2 may be used with confidence in engines manufactured from cast iron, aluminium orcombinations of the two metals, and in cooling systems made of aluminium or copper alloys. It isparticularly recommended for use in Asian OEM’s, in line with their basic chemistryrequirements.
Ultralife 1 is suitable for the cooling systems of modern engines in passenger car, trucks, agricultural and contractors plant, where an OAT antifreeze of this specification is demanded.
Terrain XL 10w-30 is a premium quality heavy duty multi-grade diesel engine oil
Superclean Zero Lead 2005 lead replacement additive.
Superclean Motor Tune Petrol Treatment
Superclean Morendo DD is a multifunctional diesel fuel additive
Servol 15W-40 is manufactured from high quality mineral oils and a high performance additive system
Servol 10W-40 is manufactured from high quality base fluids and a carefully balanced additive system. This grade is suitable for use in petrol and diesel engines fitted to passenger cars and light commercial vehicles
Seria ISO 4113 Calibration Fluid is suitable for all types of power driven and hand operated pumptest stands and nozzle testing apparatus.
Ring Free XHD mono-grades are high quality engine oils that may also be used in transmissions and hydraulic systems, depending upon equipment requirements.
Ring Free DD 40 is a high quality low ash engine oil designed for use in 2-stroke diesel engines & meets the following performance levels, API CF-2 Detroit Diesel Corporation 7SE 270 9205.
Race V Twin 20w-50 meets the requirements of high performance motorcycles such as BMW, Harley Davidson, Triumph and certain Yamaha models that specify an SAE 20W/50 viscosity engine oil.
Race Suspension Fluid 5 WT is recommended for the front forks and rear suspension units on all motorcycles used in arduous competition and off road activities.
Recommended for the front forks and rear suspension units on all motorcycles used in arduous competition and off road activities. For normal road use the viscosity grade recommended in the manufacturer’s handbook should be adhered to. Suspension Grades are available in four viscosity grades 5, 10, 15 & 20wt.
Race Suspension Fluid 15 WT is recommended for the front forks and rear suspension units on all motorcycles used in arduous competition and off road activities.
Recommended for the front forks and rear suspension units on all motorcycles used in arduous competition and off road activities. For normal road use the viscosity grade recommended in the manufacturer’s handbook should be adhered to. Suspension Grades are available in four viscosity grades 5, 10, 15 & 20wt. All grades can be freely mixed if required to provide an even greater state of suspension tune.
Race Super Cool protects against corrosion, erosion, cavitation and other problems found in hard driven engines.Super Cool pre-mixed coolant
Race Super 4 10W-40 is recommended for the majority of four stroke motorcycles, where a product of this type and specification is demanded. Makes include: Aprilia, BMW, Cagiva, Ducati, Honda, Kawasaki, Moto Guzzi, Peugeot, Suzuki, Triumph, Yamaha, etc. This grade is also suitable for gearboxes where a SAE 10W-40 is required.
Race Super 2 is recommended for engines fitted with an oil injector system and has been specially formulated to maintain the correct lubricant metering viscosity in all conditions.
Race Sport 4 10W-40 stays-in-grade, even in high revving engines, ensuring optimum reliability of both engine and gearbox components. An ideal choice for riders who commute and attend track days.
Race Performance 2T is recommended for all two stroke engines, whether premix or injector, where an oil of this specification is demanded.
This is a fully synthetic gear oil incorporating special additives
Race Foam Filter Oil a super tacky foam filter treatment
Foam Filter Cleaner
Race Drive Light Gear Oil is the first choice for all high performance road and competition machines where an SAE 10W-40 grade is specified.
Race C 40 Castor based motorcycle engine lubricants
Race C 50 Castor based motorcycle engine lubricant
Race C 30 Castor based motorcycle engine lubricants