Automotive

Multivis ECO PC 0W-20 has been primarily formulated for use in PSA DV5Rx; EP6LTD; EB2FA

& LTD; EB2ADTx e-HDI and Puretech stop-start engines, fitted after February 2023.

Ultralife 4 Long Life OAT Antifreeze may be used with confidence in engines manufactured from cast iron, aluminium or combinations of the two metals, and in cooling systems made of aluminium or copper alloys.

Morris Ultralife 3 can be used in internal combustion engines (ICEs), hybrids and the indirect cooling

systems of battery electric vehicles (BEVs) where any of the specifications listed are
demanded by the equipment manufacturer.  

Ultralife 1 is suitable for the cooling systems of modern engines in passenger car, trucks, agricultural and contractors plant, where an OAT antifreeze of this specification is demanded.

Ultralife 2 may be used with confidence in engines manufactured from cast iron, aluminium or
combinations of the two metals, and in cooling systems made of aluminium or copper alloys. It is
particularly recommended for use in Asian OEM’s, in line with their basic chemistry
requirements.  

Multivis ECO FE 0W-20 is recommended for passenger car engines, including turbo-charged and

supercharged versions, requiring a low viscosity grade.

Multivis ECO FE 0W-20 is a low viscosity, high performance engine oil that has been formulated primarily for use in Ford’s 1.5L EcoBlue turbodiesel units.

Versimax® HD18 5W-20 is designed for use in Euro 6 compliant diesel engines capable of using low viscosity fuel efficient lubricants where any of the following performance levels are specified. Scania LDF-5, MAN M3977.

Multitrans SA 75W-140 is an advanced, fully synthetic gear oil developed for use in heavy duty axles, including Scania units requiring a lubricants with a STO 2:0A qualification.

Multivis ADT RN 5W-30 has been specifically formulated to cope with the demands of Renault vehicles produced after 2018 and fitted with their latest gasoline and diesel engines. This product also covers the requirements of older units where RN0700 and RN7

Morris Lubricants Locomax 20W-40M is designed for medium speed railroad diesel engines typically built prior to 1970.

Morris Lubricants branded Race Cap

Multitrans DX15 is an advanced automatic transmission fluid, primarily developed for use in Mercedes-Benz 7-speed automatic gearboxes.

Multivis ADT DV 5w-30 Fully Synthetic, Low Speed Pre-ignition (LSPI)

Multitrans MTS 75W-90 is an advanced, fully synthetic gear oil developed for use in automotive lightduty and heavy duty axles and heavy-duty non-syncronised manual transmissions.

Versimax HD17 5W-30 is designed for use in diesel engines meeting Euro IV, V and VI emission requirements where an oil of this quality is specified.

Morris Lubricants Versimax® HD16 5W-30 is designed for use in Euro 5 / Euro 6, Interim Tier 4 / Stage 3B / Tier 4 and Stage 4 diesel engines, where any of the performance levels shown below are specified. Market sectors include: commercial vehicles, coaches, buses, off-highway and agricultural equipment, etc.

For dispensing high viscosity lubricants. Includes a medium pressure lever action pump (100 cc delivery per stroke) with a 1.5 m rubber hose with shut off valve and angled nozzle. 16 litre capacity container with oval shape with carrying handle and large opening for filling.

Multitrans VTS is a highly versatile transmission fluid that allows for rationalisation whilst providing high levels of component protection and system efficiency. 

Ultralife MAX is a heavy duty, versatile antifreeze/coolant that provides long-life corrosion protection for all engine metals, including aluminium and ferrous alloys.

A general purpose disinfectant with powerful sanitising action and pleasant lavender odour. Formulated to QAP 50 standard. Suitable for use on floors, walls, drains and in toilet areas. Lento has been used widely in kennels, stables, farms, land fills and any area where animals are kept on herd standing.

Multivis ECO PV 0W-20 is a low viscosity passenger car engine oil that provides advanced fuel economy performance coupled with outstanding wear protection and cleanliness under a wide variety of driving conditions.

A specially developed grease using a semi-synthetic blend of base oils manufactured with a bentone thickener containing a high level of graphite and synergistic EP-additives and antioxidants designed particularly for hydraulic hammer lubrication, pin and bush type of applications on large earth moving and general off-road heavy plant machinery.

Multivis ECO V 0W-30 is an engine oil providing not only the potential for fuel savings but a high level of component protection under a wide range of operating conditions in passenger cars or light commercial vehicles.

Recommended for the front forks and rear suspension units on all motorcycles used in arduous competition and off road activities. For normal road use the viscosity grade recommended in the manufacturer’s handbook should be adhered to. Suspension Grades are available in four viscosity grades 5, 10, 15 & 20wt. All grades can be freely mixed if required to provide an even greater state of suspension tune.

Race Suspension Fluid 15 WT is recommended for the front forks and rear suspension units on all motorcycles used in arduous competition and off road activities.

Morris Beanie Hat, adult size.

Multivis ECO V 0W-20 is a low viscosity engine oil providing not only the potential for fuel savings, but a high level of component protection under a wide range of operating conditions in passenger cars

MULTITRANS CVT
MULTI-APPLICATION TRANSMISSION FLUID

Multitrans CVT is a high performance transmission fluid, designed for use in a wide variety of pushbelt type Continuously Variable Transmissions (CVTs), including Jatco and Aisin systems. The product has been developed to ensure positive CVT operation for enhanced driving comfort and outstanding component protection.

Multivis ECO VB 0W-20 is a high performance fully synthetic engine oil formulated to cope with the exacting demands of OEMs requiring low viscosity engine oils, in particular Volkswagen Audi Group.

Description

Multivis ECO C2 0W-30 is a mid-SAPS (Sulphur, Ash, Phosphorus) synthetic based engine oil specially formulated to meet the superior performance and fuel efficiency requirements of engines requiring low viscosity oils for gasoline and diesel engine applications.

Recommended for the front forks and rear suspension units on all motorcycles used in arduous competition and off road activities. For normal road use the viscosity grade recommended in the manufacturer’s handbook should be adhered to. Suspension Grades are available in four viscosity grades 5, 10, 15 & 20wt.

Multitrans BC is a transmission fluid specially developed for public service vehicles and meets the requirements of all major bus and coach transmission manufacturers

Golden Film 80W-90 is ideal for gearboxes and axles fitted to vehicles built in the 1960s, 1970s, 1980s and 1990s, where an API GL4, API GL5, SAE 80W-90 or SAE 90 is specified.

Race 4T 10W-30 is recommended for the majority of high performance four stroke motorcycles, where a product of this type and specification is demanded. Safe for use in wet clutch systems. 

Race Super 2 is recommended for engines fitted with an oil injector system and has been specially formulated to maintain the correct lubricant metering viscosity in all conditions.

Race 4T 5W-40 is recommended for all turbo-charged and naturally aspirated racing engines and super bikes or where the manufacturer specifies an oil of this type and specification.

Foam Filter Cleaner

Multivis ECO FB 5W-20 has been specifically developed for use in Ford’s latest fuel efficient petrol engines

Versimax HD11 5W-30 is a top tier heavy duty diesel specific engine oil that has been designed to meet the necessary chemical limits required to maintain the efficiency of exhaust aftertreatment devices, including: DPF’s (diesel particulate filters), SCR (Adblue) / EGR NOX reduction systems, diesel oxidation catalysts (DOCs) and Adblue Slip-Catalysts.

Liquimatic DX14 is an advanced automatic transmission fluid, primarily developed for use in Mercedes Benz 7-speed RWD (Rear Wheel Drive) automatic gearboxes and all AMG models. The product ensures efficient and effective gearshift under a variety of loads and operating conditions.

Ankor ST Corrosion Preventative

Race Drive Light Gear Oil is the first choice for all high performance road and competition machines where an SAE 10W-40 grade is specified.

Ankor RR Preservative Oil

Race Suspension Fluid 5 WT is recommended for the front forks and rear suspension units on all motorcycles used in arduous competition and off road activities.