Race C 30 Castor based motorcycle engine lubricants
Multivis ECO PC 0W-20 has been primarily formulated for use in PSA DV5Rx; EP6LTD; EB2FA
& LTD; EB2ADTx e-HDI and Puretech stop-start engines, fitted after February 2023.
Ultralife 4 Long Life OAT Antifreeze may be used with confidence in engines manufactured from cast iron, aluminium or combinations of the two metals, and in cooling systems made of aluminium or copper alloys.
Morris Ultralife 3 can be used in internal combustion engines (ICEs), hybrids and the indirect cooling
systems of battery electric vehicles (BEVs) where any of the specifications listed aredemanded by the equipment manufacturer.
Ultralife 2 may be used with confidence in engines manufactured from cast iron, aluminium orcombinations of the two metals, and in cooling systems made of aluminium or copper alloys. It isparticularly recommended for use in Asian OEM’s, in line with their basic chemistryrequirements.
Ultralife 1 is suitable for the cooling systems of modern engines in passenger car, trucks, agricultural and contractors plant, where an OAT antifreeze of this specification is demanded.
Race 4T 5W-40 is recommended for all turbo-charged and naturally aspirated racing engines and super bikes or where the manufacturer specifies an oil of this type and specification.
Race 4T 10W-30 is recommended for the majority of high performance four stroke motorcycles, where a product of this type and specification is demanded. Safe for use in wet clutch systems.
Golden Film 80W-90 is ideal for gearboxes and axles fitted to vehicles built in the 1960s, 1970s, 1980s and 1990s, where an API GL4, API GL5, SAE 80W-90 or SAE 90 is specified.
Multivis ADT C3 5W-40 is a mid-SAPS (Sulphur, Ash, Phosphorus) synthetic multigrade engine oil
Multivis MLR 10W-50 is a fully synthetic multigrade motor oil developed directly from motor racing technology
Multivis ADT C2 5W-30 is a mid-SAPS (Sulphur, Ash, Phosphorus) synthetic based multigrade engine oil
Multivis ECO V 0W-20 is a low viscosity engine oil providing not only the potential for fuel savings, but a high level of component protection under a wide range of operating conditions in passenger cars
Servol 15W-40 is manufactured from high quality mineral oils and a high performance additive system
Race 4T 10W-50 can be used in all makes of 4-stroke 600cc to 1600cc performance motorcycles, tourers, cruisers and custom machines. Suitable for highly tuned competition engines, V-Twin or opposed-twin, used by Aprilia, Ducati, Suzuki, Yamaha, Kawasaki, Cagiva, Honda and BMW.
K2EP Lithium Complex Grease
Race C 40 Castor based motorcycle engine lubricants
Multivis ECO FE 0W-20 is recommended for passenger car engines, including turbo-charged and
supercharged versions, requiring a low viscosity grade.
Multivis ECO FE 0W-20 is a low viscosity, high performance engine oil that has been formulated primarily for use in Ford’s 1.5L EcoBlue turbodiesel units.
Versimax® HD18 5W-20 is designed for use in Euro 6 compliant diesel engines capable of using low viscosity fuel efficient lubricants where any of the following performance levels are specified. Scania LDF-5, MAN M3977.
A specially developed grease using a semi-synthetic blend of base oils manufactured with a bentone thickener containing a high level of graphite and synergistic EP-additives and antioxidants designed particularly for hydraulic hammer lubrication, pin and bush type of applications on large earth moving and general off-road heavy plant machinery.
Morris Lubricants Versimax® HD16 5W-30 is designed for use in Euro 5 / Euro 6, Interim Tier 4 / Stage 3B / Tier 4 and Stage 4 diesel engines, where any of the performance levels shown below are specified. Market sectors include: commercial vehicles, coaches, buses, off-highway and agricultural equipment, etc.
Multitrans SA 75W-140 is an advanced, fully synthetic gear oil developed for use in heavy duty axles, including Scania units requiring a lubricants with a STO 2:0A qualification.
For dispensing high viscosity lubricants. Includes a medium pressure lever action pump (100 cc delivery per stroke) with a 1.5 m rubber hose with shut off valve and angled nozzle. 16 litre capacity container with oval shape with carrying handle and large opening for filling.
Morris Lubricants Locomax 20W-40M is designed for medium speed railroad diesel engines typically built prior to 1970.
Multivis ADT RN 5W-30 has been specifically formulated to cope with the demands of Renault vehicles produced after 2018 and fitted with their latest gasoline and diesel engines. This product also covers the requirements of older units where RN0700 and RN7
K90 Calcium Sulphonate Complex Grease has been developed as a high performance grease for constructionplant such as bulldozers, scrapers, loading shovels and dump trucks where it will give outstanding performance.It is also recommended for use in industrial equipment operating at high temperatures or exposed to salt water.
A general purpose disinfectant with powerful sanitising action and pleasant lavender odour. Formulated to QAP 50 standard. Suitable for use on floors, walls, drains and in toilet areas. Lento has been used widely in kennels, stables, farms, land fills and any area where animals are kept on herd standing.
Multivis ECO PV 0W-20 is a low viscosity passenger car engine oil that provides advanced fuel economy performance coupled with outstanding wear protection and cleanliness under a wide variety of driving conditions.
Multivis ADT DV 5w-30 Fully Synthetic, Low Speed Pre-ignition (LSPI)
Versimax HD17 5W-30 is designed for use in diesel engines meeting Euro IV, V and VI emission requirements where an oil of this quality is specified.
Race ATV 10W-40 is recommended for use in all-terrain vehicles, quad bikes, generator sets and other
ancillary equipment, where a product of this type and viscosity grade is specified.
Morris Lubricants branded Race Cap
Versimax HD14 10W-30 has been developed for use in diesel engines fitted with exhaust gas re-circulation (EGR), selective catalytic reduction (SCR – Adblue) NOx reduction systems, diesel oxidation catalysts (DOC) and diesel particulate filters (DPF). Versimax HD14 10W-30 has been designed to cope with increased levels of bio-fuel and their effect in the engine.
Multivis ECO VB 0W-20 is a high performance fully synthetic engine oil formulated to cope with the exacting demands of OEMs requiring low viscosity engine oils, in particular Volkswagen Audi Group.
Versimax HD12 15W-40 is a mid-SAPS heavy duty diesel engine oil, manufactured from Group II base fluids. This product contains an advanced additive package formulated to provide the utmost protection when operating in very severe conditions with extended drain intervals.
Versimax HD11 5W-30 is a top tier heavy duty diesel specific engine oil that has been designed to meet the necessary chemical limits required to maintain the efficiency of exhaust aftertreatment devices, including: DPF’s (diesel particulate filters), SCR (Adblue) / EGR NOX reduction systems, diesel oxidation catalysts (DOCs) and Adblue Slip-Catalysts.
Multitrans MTS 75W-90 is an advanced, fully synthetic gear oil developed for use in automotive lightduty and heavy duty axles and heavy-duty non-syncronised manual transmissions.
Multivis ECO PC 0W-30 is a new generation passenger car engine oil formulated and developed for the latest PSA petrol and diesel engines, including hybrids.
Golden Film 10W-40 is suitable for use in passenger cars and light commercial vehicles from 1980s & early 1990s, that may have originally specified a 10W-40 or where engines have been rebuilt or restored.
Multitrans DX15 is an advanced automatic transmission fluid, primarily developed for use in Mercedes-Benz 7-speed automatic gearboxes.
Multitrans VTS is a highly versatile transmission fluid that allows for rationalisation whilst providing high levels of component protection and system efficiency.
Power Steering Fluid is blended from highly refined mineral oils and a high performance additive system. The product is designed to meet the operational demands of most steering systems where a fluid meeting General Motors Dexron® IID or IIIH specifications, or similar, are required.
Multivis MLR 10W-60 is a fully synthetic multigrade motor oil developed directly from motor racing technology
Multivis CST FB 5W-30 is a semi-synthetic multigrade engine oil specially formulated to meet the superior performance and fuel efficiency requirements of modern engines requiring low viscosity oils
Multivis CST SS 10W-40 is a semi-synthetic engine oil manufactured from advanced Group II and Group III base fluids and the latest additive technology.
Multivis CST HP 5W-40 is a synthetic technology engine oil developed directly from motor racing technology and formulated for use in the latest passenger car and van engine designs.
Multivis ADT FD 5W-30 is a synthetic tehnology engine oil specially formulated to meet the superior performance and fuel efficiency requirements of the latest generation of Ford diesels
Multivis ADT VX 5W-30 is a synthetic technology advanced lubricant, designed for use in the latest engines, including those fitted with exhaust gas after-treatment devices.
Multivis ADT C4 5w-30 Fully Synthetic, Low SAPS Engine Oil
Multivis ADT C3 5W-30 is a mid-SAPS (Sulphur, Ash, Phosphorus) synthetic multigrade engine oil
Multivis ADT C1 5W-30 is a low-SAPS, synthetic technology engine oil formulated to meet the demands and fuel efficiency expectations of the latest petrol and diesel engines, where a low viscosity oil is required.
Multivis ECO FB 5W-20 has been specifically developed for use in Ford’s latest fuel efficient petrol engines
Multivis ECO V 0W-30 is an engine oil providing not only the potential for fuel savings but a high level of component protection under a wide range of operating conditions in passenger cars or light commercial vehicles.
Multivis ECO-S 0W-20 is a high performance fully synthetic engine oil formulated to cope with the exacting demands of OEMs requiring low viscosity engine oils.
Multivis ECO C2 0W-30 is a mid-SAPS (Sulphur, Ash, Phosphorus) synthetic based engine oil specially formulated to meet the superior performance and fuel efficiency requirements of engines requiring low viscosity oils for gasoline and diesel engine applications.
Workshop Pro White Spray Grease is a combination of a Calcium and Zinc based grease in an aerosol form offering good resistance to water and heat.