Servol 15W-40 is manufactured from high quality mineral oils and a high performance additive system
Servol 10W-40 is manufactured from high quality base fluids and a carefully balanced additive system. This grade is suitable for use in petrol and diesel engines fitted to passenger cars and light commercial vehicles
Multivis ADT VA 5W-30 may be used in all VAG vehicles employing fixed service or long life service maintenance schedules where the use of engine oils approved to VW 504.00 / 507.00 are specified and where VW 503.00/503.01/506.00/506.01 performance levels have previously been required.
XEP 80w-90 is a mineral oil based gear oil, that has been formulated with a high level of extreme pressure (EP) additives and friction modifiers to protect the critical mechanisms of limited slip differentials.
Versimax® HD18 5W-20 is designed for use in Euro 6 compliant diesel engines capable of using low viscosity fuel efficient lubricants where any of the following performance levels are specified. Scania LDF-5, MAN M3977.
Multitrans VTS is a highly versatile transmission fluid that allows for rationalisation whilst providing high levels of component protection and system efficiency.
Versimax HD17 5W-30 is designed for use in diesel engines meeting Euro IV, V and VI emission requirements where an oil of this quality is specified.
Multivis MLR 10W-50 is a fully synthetic multigrade motor oil developed directly from motor racing technology
K4000EP Semi-fluid Grease
Multivis MLR 10W-60 is a fully synthetic multigrade motor oil developed directly from motor racing technology
Multitrans MTS 75W-90 is an advanced, fully synthetic gear oil developed for use in automotive lightduty and heavy duty axles and heavy-duty non-syncronised manual transmissions.
Morris Lubricants Versimax® HD16 5W-30 is designed for use in Euro 5 / Euro 6, Interim Tier 4 / Stage 3B / Tier 4 and Stage 4 diesel engines, where any of the performance levels shown below are specified. Market sectors include: commercial vehicles, coaches, buses, off-highway and agricultural equipment, etc.
K400EP Semi fluid grease
Multivis CST FB 5W-30 is a semi-synthetic multigrade engine oil specially formulated to meet the superior performance and fuel efficiency requirements of modern engines requiring low viscosity oils
Versimax HD14 10W-30 has been developed for use in diesel engines fitted with exhaust gas re-circulation (EGR), selective catalytic reduction (SCR – Adblue) NOx reduction systems, diesel oxidation catalysts (DOC) and diesel particulate filters (DPF). Versimax HD14 10W-30 has been designed to cope with increased levels of bio-fuel and their effect in the engine.
K383 Copper Anti-seize
Multitrans MPC is a high performance transmission fluid, designed to provide rationalisation opportunities without compromising performance.
Multivis CST SS 10W-40 is a semi-synthetic engine oil manufactured from advanced Group II and Group III base fluids and the latest additive technology.
Versimax HD12 15W-40 is a mid-SAPS heavy duty diesel engine oil, manufactured from Group II base fluids. This product contains an advanced additive package formulated to provide the utmost protection when operating in very severe conditions with extended drain intervals.
Multitrans BC is a transmission fluid specially developed for public service vehicles and meets the requirements of all major bus and coach transmission manufacturers
K323 is an extremely sophisticated lithium/calcium base grease which incorporates modern polymer technology.
Multivis CST HP 5W-40 is a synthetic technology engine oil developed directly from motor racing technology and formulated for use in the latest passenger car and van engine designs.
Multitrans DX15 is an advanced automatic transmission fluid, primarily developed for use in Mercedes-Benz 7-speed automatic gearboxes.
Versimax HD11 5W-30 is a top tier heavy duty diesel specific engine oil that has been designed to meet the necessary chemical limits required to maintain the efficiency of exhaust aftertreatment devices, including: DPF’s (diesel particulate filters), SCR (Adblue) / EGR NOX reduction systems, diesel oxidation catalysts (DOCs) and Adblue Slip-Catalysts.
K90 Calcium Sulphonate Complex Grease has been developed as a high performance grease for constructionplant such as bulldozers, scrapers, loading shovels and dump trucks where it will give outstanding performance.It is also recommended for use in industrial equipment operating at high temperatures or exposed to salt water.
Multitrans DCT is a premium multi-vehicle DCT fluid, formulated to provide the required levels of component protection and friction control, critical to the operational efficiency and longevity of dual clutch designs.
MULTITRANS CVT MULTI-APPLICATION TRANSMISSION FLUID
Multitrans CVT is a high performance transmission fluid, designed for use in a wide variety of pushbelt type Continuously Variable Transmissions (CVTs), including Jatco and Aisin systems. The product has been developed to ensure positive CVT operation for enhanced driving comfort and outstanding component protection.
Multi vehicle transmission fluid
K99 Water Resistant Grease
Versimax HD8 10W-40 is a low SAPS (Sulphated Ash, Phosphorus and Sulphur) synthetic heavy duty diesel specific engine oil.
Multi-System Central Hydraulic Fluid, Deutsche Pentosin-Werke GmbH, CHF 11S, CHF 202
Multivis ADT FD 5W-30 is a synthetic tehnology engine oil specially formulated to meet the superior performance and fuel efficiency requirements of the latest generation of Ford diesels
K76 acts as an excellent lubricant between rubber components and steel or other metals. Due to the vegetable base oil the grease is resistant to hydrocarbon solvents, e.g. petrol and diesel.
Lodexol Ultradrive SAE 80W-90 High Performance Gear Oil
Versimax® HD5 10W-40 is a synthetic based high performance diesel engine oil, utilizing performance additive technology to meet API CI-4 and ACEA E7.
Multivis ADT C3 5W-40 is a mid-SAPS (Sulphur, Ash, Phosphorus) synthetic multigrade engine oil
Lodexol MTFE 75W can be used in manual gearboxes, automated manual gearboxes (AMTs), semi -automatic gearboxes, transaxles and transfer boxes, where a gear oil of this type and viscosity grade is specified.
Lodexol SS 80W-140 is an extreme pressure (EP) semi-synthetic gear oil designed for use in gearboxes, drive axles and other transmission systems.
Versimax HD4 15W-40 has been formulated to provide reliable and robust performance in a wide variety of engine types used in a range of applications
Multivis ADT VX 5W-30 is a synthetic technology advanced lubricant, designed for use in the latest engines, including those fitted with exhaust gas after-treatment devices.
Lodexol 80W-90 API GL4 Gear Oil
Versimax HD3 20W-50 is suitable for use in diesel engines used in commercial vehicles, buses, coaches, vans, off-highway and agricultural equipment. The versatility of this product also allows its use in petrol engines fitted in light commercial vehicles and passenger cars, where any of the performance levels shown below are specified.
Multivis ADT C4 5w-30 Fully Synthetic, Low SAPS Engine Oil
Multivis ADT DV 5w-30 Fully Synthetic, Low Speed Pre-ignition (LSPI)
Ultralife 4 Long Life OAT Antifreeze may be used with confidence in engines manufactured from cast iron, aluminium or combinations of the two metals, and in cooling systems made of aluminium or copper alloys.
Lodexol MTF 75W-80 is a high performance, extreme pressure (EP) gear oil formulated and optimised for use in automotive gearboxes.
Lodexol SS 75W-90 is an, extreme pressure (EP) semi-synthetic gear oil designed for use in gearboxes, drive axles and other transmission systems.
Terrain XL 10w-30 is a premium quality heavy duty multi-grade diesel engine oil
Multivis ADT C3 5W-30 is a mid-SAPS (Sulphur, Ash, Phosphorus) synthetic multigrade engine oil
Golden Film 10W-40 is suitable for use in passenger cars and light commercial vehicles from 1980s & early 1990s, that may have originally specified a 10W-40 or where engines have been rebuilt or restored.
Multivis ADT RN 5W-30 has been specifically formulated to cope with the demands of Renault vehicles produced after 2018 and fitted with their latest gasoline and diesel engines. This product also covers the requirements of older units where RN0700 and RN7
Morris Ultralife 3 can be used in internal combustion engines (ICEs), hybrids and the indirect cooling
systems of battery electric vehicles (BEVs) where any of the specifications listed aredemanded by the equipment manufacturer.
Golden Film SAE 50 Classic Motor Oil
K48 Moly - Grease
Golden Film Classic Motorsport SAE 15W-50 is manufactured from high quality mineral oils and an advanced additive system and is designed primarily for petrol engines, but may also be used in older diesel units.
Workshop Pro Surface Conditioner is a special blend of silicone, solvents and cleaners.
Ring Free XHD mono-grades are high quality engine oils that may also be used in transmissions and hydraulic systems, depending upon equipment requirements.
Multivis ADT C2 5W-30 is a mid-SAPS (Sulphur, Ash, Phosphorus) synthetic based multigrade engine oil
Ultralife 2 may be used with confidence in engines manufactured from cast iron, aluminium orcombinations of the two metals, and in cooling systems made of aluminium or copper alloys. It isparticularly recommended for use in Asian OEM’s, in line with their basic chemistryrequirements.
Golden Film SAE 40 Classic Motor Oil
K43EP is a high quality NLGI 3 Lithium grease suitable for a wide range of plain and rolling bearings used within given temperature limits & is used extensively for applications throughout industry and the automotive sector.
K43EP is currently in British mainline applications as follows:
• Carriage wheel sets using Commonwealth, B4 and B5 passenger bogies. • Class 37/47/50/56 locomotive axle bearings and suspension tubes on freight and passenger duties.
K43EP is also used extensively on Heritage Railway lines where a grease of this type is specified.
Workshop Pro White Spray Grease is a combination of a Calcium and Zinc based grease in an aerosol form offering good resistance to water and heat.
Multivis ADT C1 5W-30 is a low-SAPS, synthetic technology engine oil formulated to meet the demands and fuel efficiency expectations of the latest petrol and diesel engines, where a low viscosity oil is required.
Ultralife 1 is suitable for the cooling systems of modern engines in passenger car, trucks, agricultural and contractors plant, where an OAT antifreeze of this specification is demanded.
Liquimatic DX14 is an advanced automatic transmission fluid, primarily developed for use in Mercedes Benz 7-speed RWD (Rear Wheel Drive) automatic gearboxes and all AMG models. The product ensures efficient and effective gearshift under a variety of loads and operating conditions.
Workshop Pro Fully Synthetic Chain Lubricant is a specially formulated aerosol designed for the protection of chains used in a variety of applications.
Golden Film SAE 30 Classic Motor Oil
K42EP Lithium EP 2 Muti-purpose Grease
Recommended for use in all Ford automatic transmissions where a M2C 33G qualified product has been specified. Other transmission applications include Borg Warner, ITL (JCB) and certain Land Rover units. It is also recommended for use in fluid drives, torque converters, power steering units and hydraulic systems when an oil of this specification is required.
Liquimatic DS is an advanced synthetic based automotive transmission fluid that offers increased cold start efficiency resulting in improved fuel economy.
Ultralife MAX is a heavy duty, versatile antifreeze/coolant that provides long-life corrosion protection for all engine metals, including aluminium and ferrous alloys.
Liquimatic Super ATF Transmission Fluid
Workshop Pro Semi-synthetic Chain Lubricant is a specially formulated aerosol designed for the protection of chains used in a variety of applications.
Golden Film SAE 20W-50 Classic Motor Oil is specialist high quality, low detergent/dispersant multigrade lubricant. This oil is suitable for use in naturally aspirated four stroke petrol and diesel engines.
K41EP General Purpose Lithium Grease
Recommended for the front forks and rear suspension units on all motorcycles used in arduous competition and off road activities. For normal road use the viscosity grade recommended in the manufacturer’s handbook should be adhered to. Suspension Grades are available in four viscosity grades 5, 10, 15 & 20wt.
Ankor Wax is recommended for medium and long term corrosion protection applications. This product is highly recommended for protecting bright steel wire, bars, billets, sections and sheets during long term storage and transport. It many also be used as an underbody protective
Multivis ECO FB 5W-20 has been specifically developed for use in Ford’s latest fuel efficient petrol engines
Race ATV 10W-40 is recommended for use in all-terrain vehicles, quad bikes, generator sets and other
ancillary equipment, where a product of this type and viscosity grade is specified.
Ankor ST Corrosion Preventative
Golden Film SAE 20 Classic Motor Oil
Liquimatic DII is recommended for use in all applications where a Dexron® IID is specified, including: automatic transmissions, powershift transmissions, fluid drives, torque converters, power steering units, motorcycle suspension forks, hydraulic systems, brake boosters, transfer boxes, PTOs, hydrostatic drives, etc.
Workshop PRO Anti-Seize is a lead and CFC free compound, made from solvent refined oil, Bentonite thickener and fine copper powder.
Race Suspension Fluid 15 WT is recommended for the front forks and rear suspension units on all motorcycles used in arduous competition and off road activities.
K40EP is recommended for gears, plain and anti-friction bearings where an NLGI 0 is specified and for industrial and agricultural purposes where the use of a semi fluid or very soft product is essential or desirable.
Antifreeze Ultra Life Red 5 Year Protection
Lodexol XFS 80W-140 Fully Synthetic Limited Slip Gear Oil
Multivis ECO V 0W-30 is an engine oil providing not only the potential for fuel savings but a high level of component protection under a wide range of operating conditions in passenger cars or light commercial vehicles.
Lift action pump for the transfer of lubricants
Morris MEG Antifreeze is suitable for most engine cooling systems found in cars, vans, trucks, agricultural equipment and contractor’s plant. Exceeds the requirments of many European and International Standards including: ASTM D3306, SAE J 1034, BS 6580 (2010).
Ankor RR Preservative Oil
EP 85W-140 Gear Oil API GL5 is a mineral oil based lubricants formulated for use in a wide range of automotive, plant, agricultural and industrial transmission systems.
K25 Graphited calcium Grease (Fith Wheel)
Lydian Degreaser is a ready for use, blue coloured emulsifiable fluid.
MD-4 is an effective, damp start and penetrating fluid with outstanding corrosion protection properties.
Recommended for the front forks and rear suspension units on all motorcycles used in arduous competition and off road activities. For normal road use the viscosity grade recommended in the manufacturer’s handbook should be adhered to. Suspension Grades are available in four viscosity grades 5, 10, 15 & 20wt. All grades can be freely mixed if required to provide an even greater state of suspension tune.
Race V Twin 20w-50 meets the requirements of high performance motorcycles such as BMW, Harley Davidson, Triumph and certain Yamaha models that specify an SAE 20W/50 viscosity engine oil.
Multivis ECO V 0W-20 is a low viscosity engine oil providing not only the potential for fuel savings, but a high level of component protection under a wide range of operating conditions in passenger cars
Golden Film 80W-90 is ideal for gearboxes and axles fitted to vehicles built in the 1960s, 1970s, 1980s and 1990s, where an API GL4, API GL5, SAE 80W-90 or SAE 90 is specified.
Golden Film Classic 2-Stroke Oil uses traditional technology to meet the requirements of classic, vintage and veteran motorcycles with air-cooled 2-stroke engines.
12.5kg Grease Dispenser
Golden Film AG Gear Oils are a range of mineral oil based lubricants, formulated without extreme pressure (EP) additives.
Ankor D is a special solvent deposited, short to medium term rust preventative.
Workshop Pro Traffic Film Remover is a unique combination of surface active agents, sequestrants and alkaline builders that can be used for car & lorry cleaning by brush wash or automatic brush wash. It can also be used in the cleaning of light and heavy soils from the likes of concrete floors, metal surfaces and driveways (except Tarmacadam). It may also find use in the removal of temporary corrosion inhibitors from metal surfaces. Dilutions for these applications are to be determined on an individual basis, based on the degree of soiling, method of application et cetera.
Race C 50 Castor based motorcycle engine lubricant
Race Super Cool protects against corrosion, erosion, cavitation and other problems found in hard driven engines.Super Cool pre-mixed coolant
Ring Free DD 40 is a high quality low ash engine oil designed for use in 2-stroke diesel engines & meets the following performance levels, API CF-2 Detroit Diesel Corporation 7SE 270 9205.
EP 80w-90 Gear Oil GL5
Workshop Pro Solvent Degreaser is a ready for use, pink coloured emulsifiable fluid, manufactured from a highly refined hydrocarbon solvent and a non-ionic surfactant.
This is a fully synthetic gear oil incorporating special additives
Race Suspension Fluid 5 WT is recommended for the front forks and rear suspension units on all motorcycles used in arduous competition and off road activities.
K6 is a premium quality, water resistant grease. It is recommended for the lubrication and protection of brake backing plates and plunger housings. It can also be used as a general industrial grease in wet and humid atmospheres.
Race Super 2 is recommended for engines fitted with an oil injector system and has been specially formulated to maintain the correct lubricant metering viscosity in all conditions.
Multivis ECO-S 0W-20 is a high performance fully synthetic engine oil formulated to cope with the exacting demands of OEMs requiring low viscosity engine oils.