XEP 80w-90 is a mineral oil based gear oil, that has been formulated with a high level of extreme pressure (EP) additives and friction modifiers to protect the critical mechanisms of limited slip differentials.
Workshop Pro White Spray Grease is a combination of a Calcium and Zinc based grease in an aerosol form offering good resistance to water and heat.
Workshop Pro Traffic Film Remover is a unique combination of surface active agents, sequestrants and alkaline builders that can be used for car & lorry cleaning by brush wash or automatic brush wash. It can also be used in the cleaning of light and heavy soils from the likes of concrete floors, metal surfaces and driveways (except Tarmacadam). It may also find use in the removal of temporary corrosion inhibitors from metal surfaces. Dilutions for these applications are to be determined on an individual basis, based on the degree of soiling, method of application et cetera.
Workshop Pro Surface Conditioner is a special blend of silicone, solvents and cleaners.
Workshop Pro Solvent Degreaser is a ready for use, pink coloured emulsifiable fluid, manufactured from a highly refined hydrocarbon solvent and a non-ionic surfactant.
Solvent Cleaner Aerosol. A complex mixture of hydrocarbon and oxygenated solvents designed to clean and degrease all flat and irregular surfaces.
Workshop Pro Semi-synthetic Chain Lubricant is a specially formulated aerosol designed for the protection of chains used in a variety of applications.
MD-4 is an effective, damp start and penetrating fluid with outstanding corrosion protection properties.
Workshop Pro Fully Synthetic Chain Lubricant is a specially formulated aerosol designed for the protection of chains used in a variety of applications.
A powerful heavy-duty hand cleanser containing environment friendly micro-particles for the effective removal of ingrained dirt, grease and grime. Free from petroleum derived solvents but designed to outperform traditional solvent based hand cleansers.
A selected treatment designed to remove dirt, grime and accumulated oily deposits from carburettors and fuel injection systems.
Workshop PRO Anti-Seize is a lead and CFC free compound, made from solvent refined oil, Bentonite thickener and fine copper powder.
Workshop PRO All Seasons Screen Wash is a specially formulated screen wash concentrate that is made for adding to water in vehicle washer bottles.
Versimax HD8 10W-40 is a low SAPS (Sulphated Ash, Phosphorus and Sulphur) synthetic heavy duty diesel specific engine oil.
Versimax® HD5 10W-40 is a synthetic based high performance diesel engine oil, utilizing performance additive technology to meet API CI-4 and ACEA E7.
Versimax HD4 15W-40 has been formulated to provide reliable and robust performance in a wide variety of engine types used in a range of applications
Versimax HD3 20W-50 is suitable for use in diesel engines used in commercial vehicles, buses, coaches, vans, off-highway and agricultural equipment. The versatility of this product also allows its use in petrol engines fitted in light commercial vehicles and passenger cars, where any of the performance levels shown below are specified.
Versimax® HD18 5W-20 is designed for use in Euro 6 compliant diesel engines capable of using low viscosity fuel efficient lubricants where any of the following performance levels are specified. Scania LDF-5, MAN M3977.
Versimax HD17 5W-30 is designed for use in diesel engines meeting Euro IV, V and VI emission requirements where an oil of this quality is specified.
Morris Lubricants Versimax® HD16 5W-30 is designed for use in Euro 5 / Euro 6, Interim Tier 4 / Stage 3B / Tier 4 and Stage 4 diesel engines, where any of the performance levels shown below are specified. Market sectors include: commercial vehicles, coaches, buses, off-highway and agricultural equipment, etc.
Versimax HD14 10W-30 has been developed for use in diesel engines fitted with exhaust gas re-circulation (EGR), selective catalytic reduction (SCR – Adblue) NOx reduction systems, diesel oxidation catalysts (DOC) and diesel particulate filters (DPF). Versimax HD14 10W-30 has been designed to cope with increased levels of bio-fuel and their effect in the engine.
Versimax HD12 15W-40 is a mid-SAPS heavy duty diesel engine oil, manufactured from Group II base fluids. This product contains an advanced additive package formulated to provide the utmost protection when operating in very severe conditions with extended drain intervals.
Versimax HD11 5W-30 is a top tier heavy duty diesel specific engine oil that has been designed to meet the necessary chemical limits required to maintain the efficiency of exhaust aftertreatment devices, including: DPF’s (diesel particulate filters), SCR (Adblue) / EGR NOX reduction systems, diesel oxidation catalysts (DOCs) and Adblue Slip-Catalysts.
Antifreeze Ultra Life Red 5 Year Protection
Ultralife MAX is a heavy duty, versatile antifreeze/coolant that provides long-life corrosion protection for all engine metals, including aluminium and ferrous alloys.
Ultralife 4 Long Life OAT Antifreeze may be used with confidence in engines manufactured from cast iron, aluminium or combinations of the two metals, and in cooling systems made of aluminium or copper alloys.
Morris Ultralife 3 can be used in internal combustion engines (ICEs), hybrids and the indirect cooling
systems of battery electric vehicles (BEVs) where any of the specifications listed aredemanded by the equipment manufacturer.
Ultralife 2 may be used with confidence in engines manufactured from cast iron, aluminium orcombinations of the two metals, and in cooling systems made of aluminium or copper alloys. It isparticularly recommended for use in Asian OEM’s, in line with their basic chemistryrequirements.
Ultralife 1 is suitable for the cooling systems of modern engines in passenger car, trucks, agricultural and contractors plant, where an OAT antifreeze of this specification is demanded.
Terrain XL 10w-30 is a premium quality heavy duty multi-grade diesel engine oil
Superclean Zero Lead 2005 lead replacement additive.
Superclean Motor Tune Petrol Treatment
Superclean Morendo DD is a multifunctional diesel fuel additive
Servol 15W-40 is manufactured from high quality mineral oils and a high performance additive system
Servol 10W-40 is manufactured from high quality base fluids and a carefully balanced additive system. This grade is suitable for use in petrol and diesel engines fitted to passenger cars and light commercial vehicles
Seria ISO 4113 Calibration Fluid is suitable for all types of power driven and hand operated pumptest stands and nozzle testing apparatus.
Ring Free XHD mono-grades are high quality engine oils that may also be used in transmissions and hydraulic systems, depending upon equipment requirements.
Ring Free DD 40 is a high quality low ash engine oil designed for use in 2-stroke diesel engines & meets the following performance levels, API CF-2 Detroit Diesel Corporation 7SE 270 9205.
Race V Twin 20w-50 meets the requirements of high performance motorcycles such as BMW, Harley Davidson, Triumph and certain Yamaha models that specify an SAE 20W/50 viscosity engine oil.
Race Suspension Fluid 5 WT is recommended for the front forks and rear suspension units on all motorcycles used in arduous competition and off road activities.
Recommended for the front forks and rear suspension units on all motorcycles used in arduous competition and off road activities. For normal road use the viscosity grade recommended in the manufacturer’s handbook should be adhered to. Suspension Grades are available in four viscosity grades 5, 10, 15 & 20wt.
Race Suspension Fluid 15 WT is recommended for the front forks and rear suspension units on all motorcycles used in arduous competition and off road activities.
Recommended for the front forks and rear suspension units on all motorcycles used in arduous competition and off road activities. For normal road use the viscosity grade recommended in the manufacturer’s handbook should be adhered to. Suspension Grades are available in four viscosity grades 5, 10, 15 & 20wt. All grades can be freely mixed if required to provide an even greater state of suspension tune.
Race Super Cool protects against corrosion, erosion, cavitation and other problems found in hard driven engines.Super Cool pre-mixed coolant
Race Super 4 10W-40 is recommended for the majority of four stroke motorcycles, where a product of this type and specification is demanded. Makes include: Aprilia, BMW, Cagiva, Ducati, Honda, Kawasaki, Moto Guzzi, Peugeot, Suzuki, Triumph, Yamaha, etc. This grade is also suitable for gearboxes where a SAE 10W-40 is required.
Race Super 2 is recommended for engines fitted with an oil injector system and has been specially formulated to maintain the correct lubricant metering viscosity in all conditions.
Race Sport 4 10W-40 stays-in-grade, even in high revving engines, ensuring optimum reliability of both engine and gearbox components. An ideal choice for riders who commute and attend track days.
Race Performance 2T is recommended for all two stroke engines, whether premix or injector, where an oil of this specification is demanded.
This is a fully synthetic gear oil incorporating special additives
Race Foam Filter Oil a super tacky foam filter treatment
Foam Filter Cleaner
Race Drive Light Gear Oil is the first choice for all high performance road and competition machines where an SAE 10W-40 grade is specified.
Race C 40 Castor based motorcycle engine lubricants
Race C 50 Castor based motorcycle engine lubricant
Race C 30 Castor based motorcycle engine lubricants
Race ATV 10W-40 is recommended for use in all-terrain vehicles, quad bikes, generator sets and other
ancillary equipment, where a product of this type and viscosity grade is specified.
Race 4T 5W-40 is recommended for all turbo-charged and naturally aspirated racing engines and super bikes or where the manufacturer specifies an oil of this type and specification.
Race 4T 10W-50 can be used in all makes of 4-stroke 600cc to 1600cc performance motorcycles, tourers, cruisers and custom machines. Suitable for highly tuned competition engines, V-Twin or opposed-twin, used by Aprilia, Ducati, Suzuki, Yamaha, Kawasaki, Cagiva, Honda and BMW.
Race 4T 10W-30 is recommended for the majority of high performance four stroke motorcycles, where a product of this type and specification is demanded. Safe for use in wet clutch systems.
Race 4 TT 10W-40 is an advanced fully synthetic 4-stroke motorcycle oil
Power Steering Fluid is blended from highly refined mineral oils and a high performance additive system. The product is designed to meet the operational demands of most steering systems where a fluid meeting General Motors Dexron® IID or IIIH specifications, or similar, are required.
Multivis MLR 10W-60 is a fully synthetic multigrade motor oil developed directly from motor racing technology
Multivis MLR 10W-50 is a fully synthetic multigrade motor oil developed directly from motor racing technology
Multivis ECO-S 0W-20 is a high performance fully synthetic engine oil formulated to cope with the exacting demands of OEMs requiring low viscosity engine oils.
Multivis ECO VB 0W-20 is a high performance fully synthetic engine oil formulated to cope with the exacting demands of OEMs requiring low viscosity engine oils, in particular Volkswagen Audi Group.
Multivis ECO V 0W-30 is an engine oil providing not only the potential for fuel savings but a high level of component protection under a wide range of operating conditions in passenger cars or light commercial vehicles.
Multivis ECO V 0W-20 is a low viscosity engine oil providing not only the potential for fuel savings, but a high level of component protection under a wide range of operating conditions in passenger cars
Multivis ECO PV 0W-20 is a low viscosity passenger car engine oil that provides advanced fuel economy performance coupled with outstanding wear protection and cleanliness under a wide variety of driving conditions.
Multivis ECO PC 0W-30 is a new generation passenger car engine oil formulated and developed for the latest PSA petrol and diesel engines, including hybrids.
Multivis ECO PC 0W-20 has been primarily formulated for use in PSA DV5Rx; EP6LTD; EB2FA
& LTD; EB2ADTx e-HDI and Puretech stop-start engines, fitted after February 2023.
Multivis ECO FE 0W-20 is recommended for passenger car engines, including turbo-charged and
supercharged versions, requiring a low viscosity grade.
Multivis ECO FE 0W-20 is a low viscosity, high performance engine oil that has been formulated primarily for use in Ford’s 1.5L EcoBlue turbodiesel units.
Multivis ECO FB 5W-20 has been specifically developed for use in Ford’s latest fuel efficient petrol engines
Multivis ECO C2 0W-30 is a mid-SAPS (Sulphur, Ash, Phosphorus) synthetic based engine oil specially formulated to meet the superior performance and fuel efficiency requirements of engines requiring low viscosity oils for gasoline and diesel engine applications.
Multivis CST SS 10W-40 is a semi-synthetic engine oil manufactured from advanced Group II and Group III base fluids and the latest additive technology.
Multivis CST HP 5W-40 is a synthetic technology engine oil developed directly from motor racing technology and formulated for use in the latest passenger car and van engine designs.
Multivis CST FB 5W-30 is a semi-synthetic multigrade engine oil specially formulated to meet the superior performance and fuel efficiency requirements of modern engines requiring low viscosity oils
Multivis ADT VX 5W-30 is a synthetic technology advanced lubricant, designed for use in the latest engines, including those fitted with exhaust gas after-treatment devices.
Multivis ADT VA 5W-30 may be used in all VAG vehicles employing fixed service or long life service maintenance schedules where the use of engine oils approved to VW 504.00 / 507.00 are specified and where VW 503.00/503.01/506.00/506.01 performance levels have previously been required.
Multivis ADT RN 5W-30 has been specifically formulated to cope with the demands of Renault vehicles produced after 2018 and fitted with their latest gasoline and diesel engines. This product also covers the requirements of older units where RN0700 and RN7
Multivis ADT FD 5W-30 is a synthetic tehnology engine oil specially formulated to meet the superior performance and fuel efficiency requirements of the latest generation of Ford diesels
Multivis ADT DV 5w-30 Fully Synthetic, Low Speed Pre-ignition (LSPI)
Multivis ADT C4 5w-30 Fully Synthetic, Low SAPS Engine Oil
Multivis ADT C3 5W-40 is a mid-SAPS (Sulphur, Ash, Phosphorus) synthetic multigrade engine oil
Multivis ADT C3 5W-30 is a mid-SAPS (Sulphur, Ash, Phosphorus) synthetic multigrade engine oil
Multivis ADT C2 5W-30 is a mid-SAPS (Sulphur, Ash, Phosphorus) synthetic based multigrade engine oil
Multivis ADT C1 5W-30 is a low-SAPS, synthetic technology engine oil formulated to meet the demands and fuel efficiency expectations of the latest petrol and diesel engines, where a low viscosity oil is required.
Multitrans VTS is a highly versatile transmission fluid that allows for rationalisation whilst providing high levels of component protection and system efficiency.
Multitrans SA 75W-140 is an advanced, fully synthetic gear oil developed for use in heavy duty axles, including Scania units requiring a lubricants with a STO 2:0A qualification.
Multitrans MTS 75W-90 is an advanced, fully synthetic gear oil developed for use in automotive lightduty and heavy duty axles and heavy-duty non-syncronised manual transmissions.
Multitrans MPC is a high performance transmission fluid, designed to provide rationalisation opportunities without compromising performance.
Multitrans DX15 is an advanced automatic transmission fluid, primarily developed for use in Mercedes-Benz 7-speed automatic gearboxes.
Multitrans DCT is a premium multi-vehicle DCT fluid, formulated to provide the required levels of component protection and friction control, critical to the operational efficiency and longevity of dual clutch designs.
MULTITRANS CVT MULTI-APPLICATION TRANSMISSION FLUID
Multitrans CVT is a high performance transmission fluid, designed for use in a wide variety of pushbelt type Continuously Variable Transmissions (CVTs), including Jatco and Aisin systems. The product has been developed to ensure positive CVT operation for enhanced driving comfort and outstanding component protection.
Multitrans BC is a transmission fluid specially developed for public service vehicles and meets the requirements of all major bus and coach transmission manufacturers
Multi vehicle transmission fluid
Multi-System Central Hydraulic Fluid, Deutsche Pentosin-Werke GmbH, CHF 11S, CHF 202
Morris Lubricants branded Race Cap
Morris Beanie Hat, adult size.
Morris MEG Antifreeze is suitable for most engine cooling systems found in cars, vans, trucks, agricultural equipment and contractor’s plant. Exceeds the requirments of many European and International Standards including: ASTM D3306, SAE J 1034, BS 6580 (2010).
Lydian Degreaser is a ready for use, blue coloured emulsifiable fluid.
Lodexol XFS 80W-140 Fully Synthetic Limited Slip Gear Oil
Lodexol Ultradrive SAE 80W-90 High Performance Gear Oil
Lodexol SS 80W-140 is an extreme pressure (EP) semi-synthetic gear oil designed for use in gearboxes, drive axles and other transmission systems.
Lodexol SS 75W-90 is an, extreme pressure (EP) semi-synthetic gear oil designed for use in gearboxes, drive axles and other transmission systems.
Lodexol MTFE 75W can be used in manual gearboxes, automated manual gearboxes (AMTs), semi -automatic gearboxes, transaxles and transfer boxes, where a gear oil of this type and viscosity grade is specified.
Lodexol MTF 75W-80 is a high performance, extreme pressure (EP) gear oil formulated and optimised for use in automotive gearboxes.
Lodexol 80W-90 API GL4 Gear Oil
Morris Lubricants Locomax 20W-40M is designed for medium speed railroad diesel engines typically built prior to 1970.
Liquimatic Super ATF Transmission Fluid
Liquimatic DX14 is an advanced automatic transmission fluid, primarily developed for use in Mercedes Benz 7-speed RWD (Rear Wheel Drive) automatic gearboxes and all AMG models. The product ensures efficient and effective gearshift under a variety of loads and operating conditions.